I was looking at you w2a intercooler build. im am starting my own build and have most of the parts. just had a few questions. what size injectors are you running, with the 14psi. and did you have to chang your sc shaft for a single piece cnc shaft to hand the extra rpms in the sc? thank you

What part of az you in?

The Unichip will work on either stock ECU or TRD flashed one but if you want to use any of the tunes Unichip has on hand you need the TRD flashed ECU. Otherwise you just need to pay a little extra time to your tuner to build a tune up for you from scratch.

Hey, sorry to bother you but you seemed like the guy to ask about this, for the unichip sc map is the trd reflash required on the ecu to run it?

You can buy direct from unichip or maybe pickup a used one from the classified section. You can just have the tune loaded but it won't be as good as going to a tuner and dyno. They also have rental tuning packages now too for relatively cheap. Go check their site out for it.

I saw that you got the unichip with a tune for the s/c. Could you please tell me where I can buy the chip? Also, you said that you can juSt plug and play. So this means if I get the unichip with your tune that I can just plug it in with out going to a dyno?

How much of a difference did u get with the unichip? I'm thinkin about getting it, just curious if it's gonna help that much, or if I should go with the AEM fic

Was done by a tuner, I do not have the software.

Hey do you have the unichip software and if so would you be able to send it to me