tC: Turbo tC Part out! OEM Goodies too!!
#1
Turbo tC Part out! OEM Goodies too!!
Hey guys! I got rid of my 2009 turbo tC and I am now stocked up on random OEM and aftermarket parts that I don't need. The car all of this came off of had 30k miles at the time these parts were pulled and most of the aftermarket stuff only lasted about 5k miles actually on the car.
The parts are a little greasy from the removal but ALL PARTS WILL BE CLEANED AND YOU WILL GET ADDITIONAL PHOTOS OF THEM PRIOR TO SHIPPING!! I'm willing to negotiate on most of the items so go ahead and make me a fair offer, and I'll probably take it.
I just don't feel like cleaning everything before I know whether or not it'll sell... if you have any questions, feel free to PM me here or email me at andyc0313@gmail.com
Here's the list:
ACT Heavy Duty Pressure Plate and 6 Puck Sprung Disc
Tial 38mm Wastegate (Not sure of what spring is inside)
Precision 6262 Journal Bearing Turbo w/Billet Wheel & Anti-Surge Shroud (Exhaust housing bolt holes need to be re-tapped... threads on a few holes are rough)
Dezod Xtreme Manifold (Newest Generation STRONG type)
Injector Dynamics ID1000 1000cc Injectors w/Pigtails
ARP Main Studs/Washers/Nuts
HKS SSQV3 w/Purple Insert
Injen Cold Air/Short Ram Intake (Blue tape is sealing hole where nitrous nozzle once went... it never gave me problems but if you must, you can find a short bolt that'll fit and screw it in there with some thread sealant.)
OEM Scion tC Injectors
OEM Front Motor Mount (I have a PTUNING XTREME RACE Front Mount I can sell as well!!
OEM Head Bolts
OEM Intake Manifold & Throttle Body (Will sell separate)
OEM Passenger Side Axle
OEM MAF
OEM Starter
OEM Passenger Side Mount
OEM Main Caps, Cam Caps, and TWO Rod Caps w/ARP Bolts (Will sell separately)
OEM Water Pump Pulley
OEM Power Steering Pump w/Pulley
OEM Ignition Coils
OEM Crank Pulley
OEM Driver's Side Axle
OEM Camshafts
The parts are a little greasy from the removal but ALL PARTS WILL BE CLEANED AND YOU WILL GET ADDITIONAL PHOTOS OF THEM PRIOR TO SHIPPING!! I'm willing to negotiate on most of the items so go ahead and make me a fair offer, and I'll probably take it.
I just don't feel like cleaning everything before I know whether or not it'll sell... if you have any questions, feel free to PM me here or email me at andyc0313@gmail.com
Here's the list:
ACT Heavy Duty Pressure Plate and 6 Puck Sprung Disc
Tial 38mm Wastegate (Not sure of what spring is inside)
Precision 6262 Journal Bearing Turbo w/Billet Wheel & Anti-Surge Shroud (Exhaust housing bolt holes need to be re-tapped... threads on a few holes are rough)
Dezod Xtreme Manifold (Newest Generation STRONG type)
Injector Dynamics ID1000 1000cc Injectors w/Pigtails
ARP Main Studs/Washers/Nuts
HKS SSQV3 w/Purple Insert
Injen Cold Air/Short Ram Intake (Blue tape is sealing hole where nitrous nozzle once went... it never gave me problems but if you must, you can find a short bolt that'll fit and screw it in there with some thread sealant.)
OEM Scion tC Injectors
OEM Front Motor Mount (I have a PTUNING XTREME RACE Front Mount I can sell as well!!
OEM Head Bolts
OEM Intake Manifold & Throttle Body (Will sell separate)
OEM Passenger Side Axle
OEM MAF
OEM Starter
OEM Passenger Side Mount
OEM Main Caps, Cam Caps, and TWO Rod Caps w/ARP Bolts (Will sell separately)
OEM Water Pump Pulley
OEM Power Steering Pump w/Pulley
OEM Ignition Coils
OEM Crank Pulley
OEM Driver's Side Axle
OEM Camshafts
#10
Throttle body is in good condition and still available, pm me if you're interested! Ill take 150 plus shipping for it. Negotiable. Just throwing numbers out.
Clutch, ill take 200 plus shipping, also negotiable. Has less than 2000 miles on it.
Starter, ill take 80 plus shipping, negotiable.
Clutch, ill take 200 plus shipping, also negotiable. Has less than 2000 miles on it.
Starter, ill take 80 plus shipping, negotiable.