tC1 Part-out
Thread Starter
Joined: Aug 2006
Posts: 1,253
From: Millbrae, CA
tC1 Part-out
Hey guys, as I mentioned in my thread I've started to part-out my car.
Here is the list that I'm selling, there might be some stuff that I'm forgetting so I will add if I find more stuff to sell.
*Since I've got so many interests on my parts since last week, some parts are already gone or pending sale locally so if you pm'd and showed interest in them, I'm really sorry (people literally threw cash and me took the parts, so I had no choice :/ )
Please note some parts are still on the car and I will take it off once I find a buyer.
Wilwood forged superlite 4piston front bbk with wildwood stainless steel braided flexline kit - SOLD
Powerslot plus big rear 12.5inch rotors with caliper relocators - SOLD
AEM polished billet oil cap - SOLD
TRD Radiator cap - $25 shipped
DME Radiator Tie-downs + DME Radiator Diversion Panel - SOLD
07 Injen CAI polished + Injen Hydroshield (RED) + SPC Engineering Heat Shield polished - SOLD
Brand New tC Killeglass Radiator hose kit - $100 shipped
(This picture is from their website, not mine)
NST pulley set + gates belt for 07 - LOCAL SALE PENDING
NRG Stainless hood damper kit - SOLD
TRD Axle Back Exhaust (has a dent on the bottom of the tank but you won't see it unless the car is on the lift) - $200 Local pick-up only
Weapon-R Race 4-2-1 Header + S-pipe with CEL Eliminator (has about 5000 miles) - $320 shipped
OEM 08 Headlights (in mint condition, have a couple of light chips) - SOLD
VRD Foglights - SOLD
Anzo LED Taillights - SOLD
FIG grilles powdercoated black (can't find 2 side vents grilles so top and bottom only) - SOLD
Hella supertone horns - LOCAL SALE PENDING
Oznium Full 3rd brake light (red) - SOLD
Scion OEM Front Mask for tC (in mint condition, used for only 5 days on a trip, it's missing two clips that go on your fender <<<NVM, I found the clips) - $60 shipped
Scion OEM tC car cover (Almost new ,bought in January, used for 3 weeks) - $120 shipped
Authentic Nardi 350mm Deep Corn Leather Steering wheel + NRG 2.5 Black Chrome Quick Release + Worksbell Short hub for tC1 (in mint condition, paid $600 for the setup) - $500 shipped
Authentic Bride Gias CFRP Low Max black with logo Seat with sliders and weapon-r driver's side bracket (in excellent condition with few light scratches on the back from shipping but no rips, tear, stain on the fabric) - $1200 Local pick-up only
Authentic Bride Vorga CF with sliders and weapon-r passenger's side bracket (in excellent condition with few light scratches on the back, it sometimes makes a noise when you put pressure hard against left shoulder bolster (ie. making a hard right) but it doesn't bother me) - $900 Local pick-up only
A pair of authentic Takata 4pt. Racing Harness (Long) expires in 2013 + 8 eyebolts (in mint condition with no signs of wear) will throw 4 takata shoulder pads for free (it's a bit dirty on the edges but hey, it's free!) - $740 shipped
Clazzio tC Black and Red Leather Front & Rear Seat Covers with armrest cover (in mint condition with no holes, tear, stain, etc, I used front covers for less than 3000miles before I got bride and I never carry ppl in the back so rear covers are in mint condition as well) - SOLD
ARC Brushed Titanium Shift **** (has few scratches around it) - SOLD
Scangauge II with Doctor I. cubby panel - SOLD
Customtc.com tC Dead Pedal (has few scratches) - SOLD
One G-force Pro-Series Cam-Lock 5Pt. Racing Harness (in mint condition, used twice only)- $90 shipped
TRD Front strut bar - $120 shipped
Ksport Coilovers with 14kg front springs and revised rear shocks (will come with 4 extra shocks and 2 front springs) - LOCAL SALE PENDING
Hotchkis Front and Rear Sway bar set - LOCAL SALE PENDING
Dezod V1.0 Front and V2.3 Rear Endlink set - LOCAL SALE PENDING
Brand new Ingalls Front Camber bolts - SOLD
Feel free to ask me any questions.
SORRY NO TRADES
If a part you want says 'LOCAL SALE PENDING' next to it, please check again later b/c it's not sold yet and the deal might fall through.
Here is the list that I'm selling, there might be some stuff that I'm forgetting so I will add if I find more stuff to sell.
*Since I've got so many interests on my parts since last week, some parts are already gone or pending sale locally so if you pm'd and showed interest in them, I'm really sorry (people literally threw cash and me took the parts, so I had no choice :/ )
Please note some parts are still on the car and I will take it off once I find a buyer.
Wilwood forged superlite 4piston front bbk with wildwood stainless steel braided flexline kit - SOLD
Powerslot plus big rear 12.5inch rotors with caliper relocators - SOLD
AEM polished billet oil cap - SOLD
TRD Radiator cap - $25 shipped
DME Radiator Tie-downs + DME Radiator Diversion Panel - SOLD
07 Injen CAI polished + Injen Hydroshield (RED) + SPC Engineering Heat Shield polished - SOLD
Brand New tC Killeglass Radiator hose kit - $100 shipped
(This picture is from their website, not mine)
NST pulley set + gates belt for 07 - LOCAL SALE PENDING
NRG Stainless hood damper kit - SOLD
TRD Axle Back Exhaust (has a dent on the bottom of the tank but you won't see it unless the car is on the lift) - $200 Local pick-up only
Weapon-R Race 4-2-1 Header + S-pipe with CEL Eliminator (has about 5000 miles) - $320 shipped
OEM 08 Headlights (in mint condition, have a couple of light chips) - SOLD
VRD Foglights - SOLD
Anzo LED Taillights - SOLD
FIG grilles powdercoated black (can't find 2 side vents grilles so top and bottom only) - SOLD
Hella supertone horns - LOCAL SALE PENDING
Oznium Full 3rd brake light (red) - SOLD
Scion OEM Front Mask for tC (in mint condition, used for only 5 days on a trip, it's missing two clips that go on your fender <<<NVM, I found the clips) - $60 shipped
Scion OEM tC car cover (Almost new ,bought in January, used for 3 weeks) - $120 shipped
Authentic Nardi 350mm Deep Corn Leather Steering wheel + NRG 2.5 Black Chrome Quick Release + Worksbell Short hub for tC1 (in mint condition, paid $600 for the setup) - $500 shipped
Authentic Bride Gias CFRP Low Max black with logo Seat with sliders and weapon-r driver's side bracket (in excellent condition with few light scratches on the back from shipping but no rips, tear, stain on the fabric) - $1200 Local pick-up only
Authentic Bride Vorga CF with sliders and weapon-r passenger's side bracket (in excellent condition with few light scratches on the back, it sometimes makes a noise when you put pressure hard against left shoulder bolster (ie. making a hard right) but it doesn't bother me) - $900 Local pick-up only
A pair of authentic Takata 4pt. Racing Harness (Long) expires in 2013 + 8 eyebolts (in mint condition with no signs of wear) will throw 4 takata shoulder pads for free (it's a bit dirty on the edges but hey, it's free!) - $740 shipped
Clazzio tC Black and Red Leather Front & Rear Seat Covers with armrest cover (in mint condition with no holes, tear, stain, etc, I used front covers for less than 3000miles before I got bride and I never carry ppl in the back so rear covers are in mint condition as well) - SOLD
ARC Brushed Titanium Shift **** (has few scratches around it) - SOLD
Scangauge II with Doctor I. cubby panel - SOLD
Customtc.com tC Dead Pedal (has few scratches) - SOLD
One G-force Pro-Series Cam-Lock 5Pt. Racing Harness (in mint condition, used twice only)- $90 shipped
TRD Front strut bar - $120 shipped
Ksport Coilovers with 14kg front springs and revised rear shocks (will come with 4 extra shocks and 2 front springs) - LOCAL SALE PENDING
Hotchkis Front and Rear Sway bar set - LOCAL SALE PENDING
Dezod V1.0 Front and V2.3 Rear Endlink set - LOCAL SALE PENDING
Brand new Ingalls Front Camber bolts - SOLD
Feel free to ask me any questions.
SORRY NO TRADES
If a part you want says 'LOCAL SALE PENDING' next to it, please check again later b/c it's not sold yet and the deal might fall through.
Last edited by riboflavin; Mar 9, 2011 at 02:23 PM.
Thread Starter
Joined: Aug 2006
Posts: 1,253
From: Millbrae, CA
Thread Starter
Joined: Aug 2006
Posts: 1,253
From: Millbrae, CA
