FS: SSR Type-C RS 17x8 +35mm
Thread Starter
Joined: May 2006
Posts: 1,252
From: Arlington, VA
SOLD!!! LOCK IT UP
EDIT 8/10/2010: INSTALLED PICTURES ON POST #15
EDIT 8/13/2010: Price drop to $1000 !!!
If you want to join the Baller Wheel Club, and are into light/performance wheels you found your next set of rims.

Wheels:
SSR
Type-C RS
17"x8"
+35mm Offset

As some of you may know, I sold the tC, and am finally selling my SSR's. These are perfect wheels for the performance-minded enthusist. The Type-C wheels are produced with SSR's signature Semi-Solid Fordged process, to produce a lightweight design with all the strength requirements demanded by the racetrack and everyday driving.







I purchased these from a VW owner, and I have owned these for the past two years. There have never been, and there are no bends in the wheels. They have never been touched-up, painted, etc. There is one small curb rash on one of the wheels, as shown in the photos below.


Tires:
Falken FK-452
225/45/17
The tires do not have much tread left on them, but will get you around for another thousand miles or so. There is no uneven, or camber, wear on the tires.



I have sold the Scion, so I am not interested in any trades, unless they are for C5 Corvette parts.
The wheels are located in Frederick, MD

If you have any questions please post them, or PM me.
If you have any serious offers, please PM me.
The price is $1200 for all four. I would rather doing a local deal in the MD/DC/VA area, and am willing to meet up at a reasonable distance. If you really want them shipped, and you're willing to pay shipping, we can arrange that, just PM me.
EDIT 8/10/2010: INSTALLED PICTURES ON POST #15
EDIT 8/13/2010: Price drop to $1000 !!!
If you want to join the Baller Wheel Club, and are into light/performance wheels you found your next set of rims.
Wheels:
SSR
Type-C RS
17"x8"
+35mm Offset
As some of you may know, I sold the tC, and am finally selling my SSR's. These are perfect wheels for the performance-minded enthusist. The Type-C wheels are produced with SSR's signature Semi-Solid Fordged process, to produce a lightweight design with all the strength requirements demanded by the racetrack and everyday driving.
I purchased these from a VW owner, and I have owned these for the past two years. There have never been, and there are no bends in the wheels. They have never been touched-up, painted, etc. There is one small curb rash on one of the wheels, as shown in the photos below.
Tires:
Falken FK-452
225/45/17
The tires do not have much tread left on them, but will get you around for another thousand miles or so. There is no uneven, or camber, wear on the tires.
I have sold the Scion, so I am not interested in any trades, unless they are for C5 Corvette parts.
The wheels are located in Frederick, MD
If you have any questions please post them, or PM me.
If you have any serious offers, please PM me.
The price is $1200 for all four. I would rather doing a local deal in the MD/DC/VA area, and am willing to meet up at a reasonable distance. If you really want them shipped, and you're willing to pay shipping, we can arrange that, just PM me.
Last edited by Hat_Trick_Hokie; Aug 26, 2010 at 05:05 PM.
Thread Starter
Joined: May 2006
Posts: 1,252
From: Arlington, VA
Thread Starter
Joined: May 2006
Posts: 1,252
From: Arlington, VA
Not a lot of interest from the Scion community unfortunately. So it looks like they are going to go to a VW R32 owner out west who is building a Bonneville Salt Flat racer
Thread Starter
Joined: May 2006
Posts: 1,252
From: Arlington, VA
And it turns out the VW guy backed out
Thread Starter
Joined: May 2006
Posts: 1,252
From: Arlington, VA
Damn! That's almost as big as the rear tires on my Vette! haha
Thanks Pete, I will get some pics up. You know you need to get rid of some of those Volks, and pick these up. They need to stay on a SW!!
Replied!
Replied!
Thread Starter
Joined: May 2006
Posts: 1,252
From: Arlington, VA
Per some requests, here are some pictures of the wheels mounted on my old car. Sorry, I don't have the car anymore, so I can't just go outside and take more pics:




These last two pictures were with the thinner/smaller tires that were on the wheels when I purchased them:



These last two pictures were with the thinner/smaller tires that were on the wheels when I purchased them:

does it come with a "baller wheel club" sticker?
lol jk jk.
I really liked those wheels. If it wasn't for tuition, I'd pick those up right now.
That way I can be in the high end wheel thread too.
lol jk jk.
I really liked those wheels. If it wasn't for tuition, I'd pick those up right now.
That way I can be in the high end wheel thread too.
Thread Starter
Joined: May 2006
Posts: 1,252
From: Arlington, VA
Haha, that would be nice.
Yea, I understand. Thanks for the interest, and if you find some spare cash, you know where to spend it!
Yea, I understand. Thanks for the interest, and if you find some spare cash, you know where to spend it!







