Part by Part first Gen tC
#24
#25
It was my first mod i did on my own. I was surprised the check engine light did not come on after installing it in the rain... which btw i wounded up getting a minor cold from doing that well worth it. I try to be creative on everything i do with the tC. I just dont know shi* about aftermarket parts and installing and all. So I made this forum to help me and others to get creative and point out things and well i guess its a creative-help forum lol. I do what i can with what i have plus i am one of those deal hunters haha!
#27
Ok So I have yet to see anyone do this so I guess I will be the first Here is my HID Kit at different angles:
After Install:
While On The Road:
With the LED Parking light (Just to compare)
Parked Angled View:
Parked Leveled View:
Atleast it would help someone for a general idea on how they are at certain angles and views.
After Install:
While On The Road:
With the LED Parking light (Just to compare)
Parked Angled View:
Parked Leveled View:
Atleast it would help someone for a general idea on how they are at certain angles and views.
#28
Added new things to my tc
TRD Badge:
360 Blue LED Cubby Hole Light:
took pics with iphone sorry if not great
oooops!---------vvvvvvvvvvv
360 Blue LED Cubby Hole Light:
took pics with iphone sorry if not great
oooops!---------vvvvvvvvvvv
Last edited by Vladislav; 10-13-2012 at 10:20 PM.
#29
I know it has been a while since I have done anything with my tc... But when unemployed and your money goes to pay the payment... yeah... so since I have started working again here are some new things I have added to my tc:
Fog Lights and TRD Emblem:
Yellow PUTCO foglight bulbs:
Blue Cubby Hole LED:
I know it isn't much work that was done but at the same time It is coming along pretty good.
Fog Lights and TRD Emblem:
Yellow PUTCO foglight bulbs:
Blue Cubby Hole LED:
I know it isn't much work that was done but at the same time It is coming along pretty good.
#30
I know it has been a while since I have done anything with my tc... But when unemployed and your money goes to pay the payment... yeah... so since I have started working again here are some new things I have added to my tc:
Fog Lights and TRD Emblem:
Yellow PUTCO foglight bulbs:
Blue Cubby Hole LED:
I know it isn't much work that was done but at the same time It is coming along pretty good.
Fog Lights and TRD Emblem:
Yellow PUTCO foglight bulbs:
Blue Cubby Hole LED:
I know it isn't much work that was done but at the same time It is coming along pretty good.
My cubby hole doesn't have a light! Wtf lucky
#32
HELLO Again ALL!!
It has been a while since i have posted on this thread well I have been doing some mods lately plus working non stop. So here is what I have done while away. Not much but its something!!!
I like both setups on the SRI :D
Now this was a fun mod as well:
LED Light Strip with Parking lights
Then with fogs on
Then With All LIGHTS!!!
Day Shot
It has been a while since i have posted on this thread well I have been doing some mods lately plus working non stop. So here is what I have done while away. Not much but its something!!!
I like both setups on the SRI :D
Now this was a fun mod as well:
LED Light Strip with Parking lights
Then with fogs on
Then With All LIGHTS!!!
Day Shot
#33
Ok so here I did this mod but the wires are different than the earlier models so here are pics to help you out and the link https://www.scionlife.com/forums/scion-tc-1g-ice-interior-1647/diy-make-your-tc-chirp-honk-factory-when-locks-pressed-47024/ responsible for my mod so i only take credit for showing you the 2008 Scion tC 1st gen lock motor wires:
here we go:
Ok so first i did what Fhe1079 said removed the kick panel on the left side so then i looked at the wires in my 08 vs. his.
Mine are different so here is the picture of the two wires you need and yes its still the grey plug:
Now once you look its the bottom two wires blue and pink
once you have the wires found; before tapping them run them throught the grommet under the dashboard like this:
then connect your new BLACK wire to the BLACK wire and your new RED wire to the RED wire on your 12V siren or buzzer. now before you go crazy and hookup the siren and start tapping. When you wire tap them make sure you have one RED wire and one Black Wire. Wire tap the PINK wire to the RED wire and the BLACK to the BLUE wire.
Then proceed back to the engine bay and mount your siren or buzzer. Mine is mounted between the car and my intake. I figured great spot because there were already holes there. before looking at the pic below just note i recycled the siren from my wife's old car alarm to do this mod :D now she makes noise and i saved the environment!!
it sounds like this!
I am not responsible for damages done so that is all on you. any questions just ask.
here we go:
Ok so first i did what Fhe1079 said removed the kick panel on the left side so then i looked at the wires in my 08 vs. his.
Mine are different so here is the picture of the two wires you need and yes its still the grey plug:
Now once you look its the bottom two wires blue and pink
once you have the wires found; before tapping them run them throught the grommet under the dashboard like this:
then connect your new BLACK wire to the BLACK wire and your new RED wire to the RED wire on your 12V siren or buzzer. now before you go crazy and hookup the siren and start tapping. When you wire tap them make sure you have one RED wire and one Black Wire. Wire tap the PINK wire to the RED wire and the BLACK to the BLUE wire.
Then proceed back to the engine bay and mount your siren or buzzer. Mine is mounted between the car and my intake. I figured great spot because there were already holes there. before looking at the pic below just note i recycled the siren from my wife's old car alarm to do this mod :D now she makes noise and i saved the environment!!
it sounds like this!
Last edited by Vladislav; 08-02-2013 at 10:54 PM. Reason: Added link for sound!
#34
So here are some shots at night of the LED strips on the headlamps I wanted to have mine look different than others. beisdes it helps from people side swiping your car:
and here i just got these yesterday my NOKYA Reverse LEDs:
and here i just got these yesterday my NOKYA Reverse LEDs:
#37
Thread
Thread Starter
Forum
Replies
Last Post
1989menace
Scion tC 1G Owners Lounge
110
02-14-2018 01:18 PM
a-mendoza
Scion tC 1G Forced Induction
44
10-07-2012 12:04 PM