soros151

I already posted this at http://www.ft86club.com/forums/showthread.php?t=20238, but I wanted to share it here too.

I have a small obsession with sharing information. I took measurements of the stock intake pipe and box. All this measurements are somewhat accurate, but might be approximate. Feel free to copy the pictures and comment on them. Use them for your own projects. Sorry if not everything was documented. Here we go. Sorry for the pictures for being so big, but I couldn't re size them without losing a lot of quality.

I will Use the Next picture to represent the different areas of measurements. Again, take my measurements with a grain of salt, this is just something I did on a small amount of time. All measurements are done in Inches (")

Area A >>> Orange
Area B >>> Blue
Area C >>> Red
Area D >>> White
Area E >>> Yellow
Area F >>> Green



Area A:
Outer Diameter (O.D.) : 2.96" - 3"
Inner Diameter (I.D.) : 2.8"







Area B:
O.D. :3.2"
I.D. :2.9"
Length Area B+D: 9.25" to From Top Edge to Middle of 90* Bend







Area C:
O.D. :3"
AreaC+E Length: 13.8"~




Area D:
O.D. :3.06"
I.D. :3"






Area E:
Length: 10.4"
Width: 6.6"
Height: 7"
Air Filter Width: 2"






Space Between Engine Pulley and Air Box: 1.70"~


Area F (Air Box Intake Area)
Length: 5"
Width: 1.3"~
Height: 2"




Enjoy Guys. :happy0180: Again sorry for the size of the pictures and don't mind my bored wife. LOL!! Let me know if there any other measurements you guys would like and I'll see if I can do them.

ScionFred

iTrader: (1)

I don't need his info ATM but have it saved for future reference. It should be stickied but then that is why this forum is almost dead and barely hanging on life support...