The Exact Metric size and Pitch of the tC1 Tow Hook thread?
 

https://cimg9.ibsrv.net/gimg/www.sci...4b08186b62.jpg

Does anyone Know the Exact Metric size and Pitch of the tC1 Tow Hook thread?

It is located behind the small round cover on the Front bumper, Driver's Side. If you have the Original Tow Hook, it should be under the cargo hatch
or you can measure the hole in the Front bumper behind the cover. It comes off with a small screwdriver.

TIA

MR_LUV

for example on my tC2.5=2014-2016, it's M24x2.0 (fine)

The front end was redesigned in 2014 and I think the Tow Hook thread size might be different
than a tC1=2005-2010 and/or tC2=2011=2013. There could even be 3 different sizes.

Does any one Know Exactly? I'm looking for Knowledge, not Guesses.

1. tC1=2005-2010= ?
2. tC2=2011-2013= ?
3. tC2.5=2014-2016= M24x2.0 (fine)

https://farm5.staticflickr.com/4237/...f06a1c1f_c.jpg" target="_blank">https://farm5.staticflickr.com/4237/...f06a1c1f_c.jpg

Example Shown: Measurement of the tC2.5 Tow Hook



Now, Who can provide the Same Information on their tC1=(2005-2010)
and/or tC2=(2011-2013) Tow Hook?

I need the Exact Thread Size, Pitch, and Length.

I'm in for the 2005-2010 tow hook specs

??

I Guess Not. Must be Too Complicated for most folks.

:ponder: :lalala:


__________________

I'm going to go ahead and put what information I know into this old thread for anyone else that's searching for this info.

2005-2010: M24 x 2.0
2011-2013: M20 x 2.0
2014-2016: M24 x 2.0