Go Back  Scionlife.com > Scion tC First Gen > Scion tC 1G Owners Lounge > Scion tC 1G Drivetrain & Power
Reload this Page >

//Dezod Motorsports// NEW versions of TC1 Green & Red headers

Notices
Scion tC 1G Drivetrain & Power Engine and transmission discussions...

//Dezod Motorsports// NEW versions of TC1 Green & Red headers

Old 06-02-2014, 04:33 PM
  #1  
Sponsor
10 Year Member
5 Year Member

Scionetics
KAD
SL Member
Thread Starter
 
paul_dezod's Avatar
 
Join Date: Oct 2005
Location: Western NY
Posts: 11,936
Default //Dezod Motorsports// NEW versions of TC1 Green & Red headers

What's new? Fully mandrel bent construction (less welds and making a stronger unit overall), O2 bung placement is more precise, MIG & TIG construction and all TC1 headers come with a replacement exhaust manifold flange gasket to the cylinder head

TC1 Green:



More info and ordering:
http://www.dezod.com/pd_dezod_motorsports_4-1.cfm

TC1 Red:



More info and ordering:
http://www.dezod.com/pd-dezod-motorsports-red.cfm
paul_dezod is offline  
Old 06-16-2014, 07:44 PM
  #2  
aen
Senior Member
10 Year Member
5 Year Member
SL Member
 
Join Date: Aug 2006
Location: Las Vegas!
Posts: 5,749
Default

is that a turbo?!
aen is offline  
Old 06-16-2014, 07:49 PM
  #3  
Sponsor
10 Year Member
5 Year Member

Scionetics
KAD
SL Member
Thread Starter
 
paul_dezod's Avatar
 
Join Date: Oct 2005
Location: Western NY
Posts: 11,936
Default

Originally Posted by aen View Post
is that a turbo?!
Nope. N/A
paul_dezod is offline  
Old 06-16-2014, 07:57 PM
  #4  
aen
Senior Member
10 Year Member
5 Year Member
SL Member
 
Join Date: Aug 2006
Location: Las Vegas!
Posts: 5,749
Default

Originally Posted by paul_dezod View Post
Nope. N/A
it was a joke, remember me paul?

it's probably been way too long for me to joke like that
aen is offline  
Old 06-16-2014, 07:59 PM
  #5  
Sponsor
10 Year Member
5 Year Member

Scionetics
KAD
SL Member
Thread Starter
 
paul_dezod's Avatar
 
Join Date: Oct 2005
Location: Western NY
Posts: 11,936
Default

Originally Posted by aen View Post
it was a joke, remember me paul?

it's probably been way too long for me to joke like that
I do recall you AEN. It's been forever man.
paul_dezod is offline  
Old 06-16-2014, 08:04 PM
  #6  
aen
Senior Member
10 Year Member
5 Year Member
SL Member
 
Join Date: Aug 2006
Location: Las Vegas!
Posts: 5,749
Default

Originally Posted by paul_dezod View Post
I do recall you AEN. It's been forever man.
definitely, ive gone through a couple of cars. very nice header by the way. i'm glad to see you're still supporting the community! You always have built quality parts.
aen is offline  
Old 06-16-2014, 08:06 PM
  #7  
Member
SL Member
iTrader: (1)
 
Freak's Avatar
 
Join Date: Apr 2011
Location: AZ
Posts: 76
Default

What kind of gains will this header produce over the first gen green header? Have you had a chance to Dino it yet? I have the first gen and it rocks.
Freak is offline  
Old 06-16-2014, 08:07 PM
  #8  
Sponsor
10 Year Member
5 Year Member

Scionetics
KAD
SL Member
Thread Starter
 
paul_dezod's Avatar
 
Join Date: Oct 2005
Location: Western NY
Posts: 11,936
Default

Originally Posted by aen View Post
definitely, ive gone through a couple of cars. very nice header by the way. i'm glad to see you're still supporting the community! You always have built quality parts.
Spanks man! What's the car now?

Originally Posted by Freak View Post
What kind of gains will this header produce over the first gen green header? Have you had a chance to Dino it yet? I have the first gen and it rocks.
Puts the first gen to shame some in the mid-range and low end. The newest version is really top notch.
paul_dezod is offline  
Old 06-16-2014, 08:13 PM
  #9  
Member
SL Member
iTrader: (1)
 
Freak's Avatar
 
Join Date: Apr 2011
Location: AZ
Posts: 76
Default

Paul,

Have you released to price of the new header and is there a group buy in the works?
Freak is offline  
Old 06-16-2014, 08:13 PM
  #10  
aen
Senior Member
10 Year Member
5 Year Member
SL Member
 
Join Date: Aug 2006
Location: Las Vegas!
Posts: 5,749
Default

Originally Posted by paul_dezod View Post
Spanks man! What's the car now?
a prius C =( i'm a parent now.

i had a twin turbo g35 for a while though. that was exciting.
aen is offline  
Old 06-16-2014, 08:15 PM
  #11  
Sponsor
10 Year Member
5 Year Member

Scionetics
KAD
SL Member
Thread Starter
 
paul_dezod's Avatar
 
Join Date: Oct 2005
Location: Western NY
Posts: 11,936
Default

Originally Posted by Freak View Post
Paul,

Have you released to price of the new header and is there a group buy in the works?
Pricing is released and is provided in the first post for both red and green.

Originally Posted by aen View Post
a prius C =( i'm a parent now.

i had a twin turbo g35 for a while though. that was exciting.
Congrats! I know how that is. That's why I have a G8 GT
paul_dezod is offline  
Old 06-16-2014, 08:17 PM
  #12  
Member
SL Member
iTrader: (1)
 
Freak's Avatar
 
Join Date: Apr 2011
Location: AZ
Posts: 76
Default

Cool thanks
Freak is offline  
Old 06-16-2014, 08:20 PM
  #13  
Sponsor
10 Year Member
5 Year Member

Scionetics
KAD
SL Member
Thread Starter
 
paul_dezod's Avatar
 
Join Date: Oct 2005
Location: Western NY
Posts: 11,936
Default

Originally Posted by Freak View Post
Cool thanks
No problem. Let me know if you have any other Qs
paul_dezod is offline  
Old 06-19-2014, 04:29 AM
  #14  
Senior Member
10 Year Member
5 Year Member
SL Member
 
TCpete's Avatar
 
Join Date: Nov 2005
Location: WORLD WIDE Flossin
Posts: 13,365
Default

I'll be posting up a full review on the RED one over the coming days. If I can jump on the dyno on a dyno day and get a decent price I'll have some results on print. lets see if I can break 250 NA on e85 and the motec.
TCpete is offline  
Old 06-19-2014, 02:06 PM
  #15  
Sponsor
10 Year Member
5 Year Member

Scionetics
KAD
SL Member
Thread Starter
 
paul_dezod's Avatar
 
Join Date: Oct 2005
Location: Western NY
Posts: 11,936
Default

Originally Posted by TCpete View Post
lets see if I can break 250 NA on e85 and the motec.
That would be insane! GL TCpete
paul_dezod is offline  
Old 07-23-2014, 03:43 PM
  #16  
Senior Member
10 Year Member
5 Year Member
SL Member
 
TCpete's Avatar
 
Join Date: Nov 2005
Location: WORLD WIDE Flossin
Posts: 13,365
Default

So i just picked up the red header... heres my review on it. I've owned a few and raced a few for the 2az and usually, the Alpha werks or MMW is your best bet depending on where you want the power range to fall. The nice thing about the Dezod one is they finally got it right with this design. Its a good balance of not only low end power increase but solid mid range to top end power also. Most headers will either leave you on your face at 5500k rpms when the TQ curve falls, or be super laggy and not much power will be made until you're really high in the rpm range and in excess of 80 mph+. They've basically created a nice tight primary design that allows you to breath up top but still be able to get the car moving on the mid and low end of the rpm range, something the AW and MMW have not been able to do successfully because im sure the time to R&D it was just not there. After racing a few cars and making some dig runs from 0 to 145 (sorry kids Im running an m800 with no speed/fuel cut) I can say the header has given me a bigger advantage now through out the entire race or road coarse event versus my previous set up (AW header). I've been able to keep up with a few cars wayyyy out of my league and am looking forward to hitting the dyno soon to test how much the car is really putting down after this upgrade. (previous #'s 247 whp 225tq on e85) NA.

After a lengthy inspection of the header and having tested it out on a few nights of racing, I am really pleased and impressed with the header's performance thus far. For anyone sticking to NA or just wanting an extra boost in power with out going turbo, this dezod catless header is a great pick up and you won't be disappointed!
TCpete is offline  
Old 07-23-2014, 05:03 PM
  #17  
Sponsor
10 Year Member
5 Year Member

Scionetics
KAD
SL Member
Thread Starter
 
paul_dezod's Avatar
 
Join Date: Oct 2005
Location: Western NY
Posts: 11,936
Default

Originally Posted by TCpete View Post
So i just picked up the red header... heres my review on it. I've owned a few and raced a few for the 2az and usually, the Alpha werks or MMW is your best bet depending on where you want the power range to fall. The nice thing about the Dezod one is they finally got it right with this design. Its a good balance of not only low end power increase but solid mid range to top end power also. Most headers will either leave you on your face at 5500k rpms when the TQ curve falls, or be super laggy and not much power will be made until you're really high in the rpm range and in excess of 80 mph+. They've basically created a nice tight primary design that allows you to breath up top but still be able to get the car moving on the mid and low end of the rpm range, something the AW and MMW have not been able to do successfully because im sure the time to R&D it was just not there. After racing a few cars and making some dig runs from 0 to 145 (sorry kids Im running an m800 with no speed/fuel cut) I can say the header has given me a bigger advantage now through out the entire race or road coarse event versus my previous set up (AW header). I've been able to keep up with a few cars wayyyy out of my league and am looking forward to hitting the dyno soon to test how much the car is really putting down after this upgrade. (previous #'s 247 whp 225tq on e85) NA.

After a lengthy inspection of the header and having tested it out on a few nights of racing, I am really pleased and impressed with the header's performance thus far. For anyone sticking to NA or just wanting an extra boost in power with out going turbo, this dezod catless header is a great pick up and you won't be disappointed!
Wow. Thanks for the review. Glad to hear you like it as much as we do. Are you running an aftermarket s-pipe?
paul_dezod is offline  
Old 07-23-2014, 05:51 PM
  #18  
Senior Member
10 Year Member
5 Year Member
SL Member
 
TCpete's Avatar
 
Join Date: Nov 2005
Location: WORLD WIDE Flossin
Posts: 13,365
Default

Originally Posted by paul_dezod View Post
Wow. Thanks for the review. Glad to hear you like it as much as we do. Are you running an aftermarket s-pipe?
yea im running an invidia spipe with your dezod gasket. fit like a glove.
TCpete is offline  
Old 07-23-2014, 07:24 PM
  #19  
Sponsor
10 Year Member
5 Year Member

Scionetics
KAD
SL Member
Thread Starter
 
paul_dezod's Avatar
 
Join Date: Oct 2005
Location: Western NY
Posts: 11,936
Default

Originally Posted by TCpete View Post
yea im running an invidia spipe with your dezod gasket. fit like a glove.
Great news!!!! New design works well in every plateau.
paul_dezod is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
8URAWD
Scion tC 2G Owners Lounge
21
05-02-2018 02:22 PM
SkillFreeJake
Scion tC 2G Aero & Exterior
17
07-27-2015 12:34 AM
stayintrucha
Scion tC 2G Owners Lounge
8
03-17-2015 08:45 PM
k1114
Scion tC 1G Forced Induction
0
03-06-2015 03:43 PM
paul_dezod
Scion tC 1G Drivetrain & Power
5
01-05-2015 02:07 PM


Thread Tools
Search this Thread
Quick Reply: //Dezod Motorsports// NEW versions of TC1 Green & Red headers


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.