Official PrecisionMuffler.com AxleBack Thread.... With Sound
Thread Starter
Senior Member




Scion Justice League of America
SL Member
Joined: Apr 2005
Posts: 5,594
From: Portland, Oregon
The down pipe/S-Pipe may give you a little... emphasis on little... more WHP. as it's a really restrictive piece of stock equipment. It runs from your header assembly to the cat and it's bent like an s... the A/M versions are better bent and advertise more flow... so, you may get a small advantage as a result.
I have the precisionmuffler.com Dual AxleBack Exhaust.
https://www.scionlife.com/forums/vie...asc&highlight=
nice sound and not loud
https://www.scionlife.com/forums/vie...asc&highlight=
nice sound and not loud
They are all going to offer the same gains which are pretty minimal...If you arent running a header or some kind of exhaust upgrade than I dont feel its worth it. Its is a suporting mod that will allow the other mods that do make more power a little more efficient...like switching from conventional motor oil to full synthetic.
Guest
Posts: n/a
Originally Posted by SquallLHeart
hey gabe.. anyone do a dyno yet? i'm curious to the gains.... haha... well.. i have to save enough money anyway...
help me out? it's x-mas..... o_O
help me out? it's x-mas..... o_O
The tip on Tim's axle back ,in the original post, is a 4inch Diameter tip and so is the original double wall tip that we use on the PM axle back. If you want an oval tip for your tC PM axle back, I can arrange that for you. :D
I would of like to hear the sound outside the car where its not so insulated from interior. It did sound good from what I heard.
TRD exhaust with intake and header OUTside of car WOT sound clip....click below for video.
http://www.jusspress.com/day.php?use...entTime=004418
Just a sound of normal start up click here.
http://media.putfile.com/file11168
TRD exhaust with intake and header OUTside of car WOT sound clip....click below for video.
http://www.jusspress.com/day.php?use...entTime=004418
Just a sound of normal start up click here.
http://media.putfile.com/file11168
Thread Starter
Senior Member




Scion Justice League of America
SL Member
Joined: Apr 2005
Posts: 5,594
From: Portland, Oregon
Which clip is misleading? Sounds Very similiar outside the car as well.... just miserable weather for me to make a recording from outside....
My recording was done in the trunk, right next to the muffler...
My attention was for Rasp, not tone..... so I can absolutely say there is no rasp with my setup.
My recording was done in the trunk, right next to the muffler...
My attention was for Rasp, not tone..... so I can absolutely say there is no rasp with my setup.
Originally Posted by Stylis
Originally Posted by ignitionr34
how much was it... and just out of curiousity is the piping 2.25 or 2.5?

Originally Posted by Stylis
Originally Posted by SquallLHeart
hey gabe.. anyone do a dyno yet? i'm curious to the gains.... haha... well.. i have to save enough money anyway...
help me out? it's x-mas..... o_O
help me out? it's x-mas..... o_O
The tip on Tim's axle back ,in the original post, is a 4inch Diameter tip and so is the original double wall tip that we use on the PM axle back. If you want an oval tip for your tC PM axle back, I can arrange that for you. :D
Stock TC's dyno about 5hp with an axleback at the wheels or slightly more stock,not 2. Some dynos for you guys

https://www.scionlife.com/forums/viewtopic.php?t=80070





