I need some help with locating the right three wires on a 06 Scion Tc ignition wiring harness to connect the three wires of the Greddy Full Auto Turbo Timer. I am not sure if the Tc has a standard setup(12v, acc, on) or the other setup with has (12v, on, on). Here is the link to the Greddy Full Auto Turbo Timer instructions. What I am talking about is on page 5.

http://www.greddy.com/img/PHP/products/pdf/685.pdf

Im pretty sure the Black with Orange stripe is the 12v wire, but not sure with the other two wires on the ignition harness.

Thanks guys, Bryan.

 

This is all the info I have on the wiring harness 3rd post

I think there is a better version floating around somewhere but I dont know where it is.

 

Alright. This is what I discovered for hooking up the Greddy Full Auto Turbo Timer.

*The red wire from the Greddy harness connects to the red wire on the iginition harness.

*The blue wire from the Greddy harness connects to the blue wire on the iginition harness.

*The green wire from the Greddy harness connects to the orange wire on the iginition harness.

*The black wire from the Greddy harness connects to any ground on the cars frame.

*The brown wire from the Greddy harness connects to the ebrake wire.

*The purple wire from the Greddy harness connects to the speed sensor wire which is the purple wire on the ECM/ECU. (2nd plug from top, pin 17)

No problem and I believe all 05-07 models have the same color ignition wires.

 

/\/\ Great info! Gonna def need it in a few months