Torque specs
Does anyone happen to know what the exhaust camshaft is suppose to be torque down to? Or where I can get a manual that has the torque specs for a 2005 Scion tC
|
Re: Torque specs
Originally Posted by chillywilly638
does anyone happen what the exhaust camshaft is suppose to be torque down to? Or where I can get a manual that has the torque specs for a 2005 Scion tC
(a) Apply a light coat of engine oil to the journal portion of the camshaft. (b) Install the timing chain onto the camshaft timing gear with the paint mark aligned with the timing mark in the camshaft timing gear as shown in the illustration. (c) Examine the front marks and numbers and check that the order is as shown in the illustration. Then install the bearing caps into the cylinder head. (d) Apply a light coat of engine oil on the threads and under the heads of the bearing cap bolts. Lifter No. Thickness mm (in.) Lifter No. Thickness mm (in.) Lifter No. Thickness mm (in.) 06 5.060 (0.1992) 30 5.300 (0.2087) 54 5.540 (0.2181) 08 5.080 (0.2000) 32 5.320 (0.2094) 56 5.560 (0.2189) 10 5.100 (0.2008) 34 5.340 (0.2102) 58 5.580 (0.2197) 12 5.120 (0.2016) 36 5.360 (0.2110) 60 5.600 (0.2205) 14 5.140 (0.2024) 38 5.380 (0.2118) 62 5.620 (0.2213) 16 5.160 (0.2031) 40 5.400 (0.2126) 64 5.640 (0.2220) 18 5.180 (0.2039) 42 5.420 (0.2134) 66 5.660 (0.2228) 20 5.200 (0.2047) 44 5.440 (0.2142) 68 5.680 (0.2236) 22 5.220 (0.2055) 46 5.460 (0.2150) 70 5.700 (0.2244) 24 5.240 (0.2063) 48 5.480 (0.2157) 72 5.720 (0.2252) 26 5.260 (0.2071) 50 5.500 (0.2165) 74 5.740 (0.2260) 28 5.280 (0.2079) 52 5.520 (0.2173) - - Timing Marks Paint Mark A098176E02 A098177E03 EM–14 2AZ-FE ENGINE MECHANICAL – VALVE CLEARANCE EM (e) Using several steps, uniformly tighten the 10 bearing cap bolts in the sequence shown in the illustration. Torque: 29.5 N*m (301 kgf*cm, 22 ft.*lbf) for No. 1 bearing cap 9.0 N*m (92 kgf*cm, 80 in.*lbf) for No. 3 bearing cap 16. INSTALL NO. 2 CAMSHAFT (a) Apply a light coat of engine oil to the journal portion of the No. 2 camshaft. (b) Put the No. 2 camshaft on the cylinder head with the paint mark of the chain aligned with the timing mark in the camshaft timing sprocket. (c) While holding the No. 2 camshaft by hand, temporarily tighten the camshaft timing sprocket set bolt. (d) Examine the front marks and numbers and check that the order is as shown in the illustration. Then install the bearing caps onto the cylinder head. (e) Apply a light coat of engine oil to the threads and under the heads of the bearing cap bolts. (f) Using several steps, uniformly tighten the 10 bearing cap bolts in the sequence shown in the illustration. Torque: 29.5 N*m (301 kgf*cm, 22 ft.*lbf) for No. 1 bearing cap 9.0 N*m (92 kgf*cm, 80 in.*lbf) for No. 3 bearing cap 8 4 2 6 10 7 3 1 5 9 No. 1 A098177E02 Timing Mark Paint Mark A098178E02 A052473E01 A098174E05 7 3 4 2 6 10 1 5 9 8 A098174E03 2AZ-FE ENGINE MECHANICAL – VALVE CLEARANCE EM–15 EM (g) While holding the camshaft with a wrench, tighten the camshaft timing sprocket set bolt. Torque: 54 N*m (551 kgf*cm, 40 ft.*lbf) NOTICE: Be careful not to damage the valve lifter. HOPEFULY THIS HELPS |
Kind of. Its kinda hard without the illustrations. I'm a picture person lol but thank I'm sure this will come in handy
|
|
:bow:
|
Originally Posted by Tomas
:clap: |
All times are GMT. The time now is 05:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands