This morning I tried putting in my springs and ran into a problem with the endlink bolt. We figured out how to loosen by referring to the shop manual. After taking the bolt off it started hailing so we had to pack it up . I reinstalled the endlink bolt on the strut. Soon after i noticed a rattling sound coming from the right front tire (the one i worked on) Later I inspected the bolt again and i realised it wouldnt tighten all the way. I used a high powered torque drill but still wouldnt tighten even while holding the allen bolt.

Anyone know wtf is up?

 

try backing it out and then trying again, you might have cross threaded it

 

try backing it out and then trying again, you might have cross threaded it

 

Nope not cross threaded at all checked and double checked.

 

Don't know what to say then, muscle up!!!