2013-2014 Engine Cover :(
 

I just received the new Engine Cover and i must say I'm not digging it. The older version was much nicer IMO, what do you guys think.

I was expecting to get the one that covers the actual engine. :frown:

Its not that bad, at least it hides the ugly bits.

I didn't even get one when I bought mine brand new. lol

Hey lost, is not bad... In fact, I like to ask you where you bought it and if you can pass me the link to buy one...if they ship to Canada.


Thanks!

Me too! Where from and how much. My naked engine is UGLY.

I got this one on eBay....its the same for a 2.5 Camry and RAV4.


http://i.ebayimg.com/00/s/MzM3WDU5OQ...UZcd4/$_12.JPG

My wife have a RAV 4 2012 (previous model). Cover looks very similar to the one of ockevin and doesn't fit on my engine, hope this is not the case...

Mine fits good. I will snap a picture later. I am painting the header cover right now.

Hi guys sorry for the late reply.

I myself am in curacao and ordered it at Headquarters toyota in miami for around USd. 120,-

Lost: Is for a Camry? or how you ordered?


Thanks!

I got it on eBay.... Type in Camry 2.5 cover

Thank you ocKevin!. I will look for one too!

Yup. That is the Camry one. There is actually 2 I think. The one the tC uses as well I believe.

Yes, you just ask for the 2.5L Camry Engine Cover.

_____

wow we have major time zone differences

On eBay now ....type RAV4 2.5 cover and you will see the cover for about $ 70

Finally a cover, now my engine doesn't look naked. Found on ebay for $45, from a 2010 Camry.


https://farm9.staticflickr.com/8596/...2a11f50c_c.jpg

Looks good

Thanks. I like this one better than the RAV4, more coverage.

I actually like both. The first one is cool if you want to be creative. I'd be happy with either haha.

had to get me an engine cover too, couldn't stand seeing the coils. painted to match.

Both look decent, but I would've expected Toyota to have included a rebaged one for the tC.

Cover is just another piece to take off. Why not go through the process of pollishing your valve cover. At least that way it will look like you put effort into what you own. Not just cover it up with plastic.

Mine was completely pitted by whatever the dealer used to clean the engine. Replacing the value cover would have been too costly.

You don't have to replace it. Just take it off and go thorough the process of polishing it.

This video shows how lengthy of a process it is if you do it thoroughly....

This thread is on the 2nd gen xB showing you the results of stock to polished....https://www.scionlife.com/forums/sci...polish-200625/

You can even take it to a shop and have them powder coat it to whatever color you want without having to sand it down. It will look rough with the coating over it unless you sand it down first giving it the smooth look.

IMO I think this is far more impressive than using plastic covers cause then you can also change the hose colors and other stuff in the engine bay where it all shows your individuality instead of it all being hidden under plastic.

does it snap into place or are any modifications needed??

No mods needed. Its off the same Toyota engine. Just clean it up, and snap it on.

wait so all of yours came with a cover? i bought mine brand new but didnt come with one :(

The 2011+ tC does not come with an engine cover. They are just showing ones they've bought.

Did you just put a Scion badge on yourself? If so that looks clean, I'd much rather have a Scion badge over Toyota just to keep badges matching (i know thats picky lol)

Found the Scion emblem on ebay, it's the same one as on your steering wheel. Had to grind down the Toyota "T" to get good adhesion with 3M tape.
Also header cover has been painted black since this picture was taken.
Guess I'm a little anal also.

I'd say it is the ugly bits :tongue:

The polished or painted valve covers just look so much nicer IMO.

Ok, finally after long search (in Canada is not easy to find a Camry engine covers, at least where I live), found my cover in eBay $50 + $40 shipping & import taxes (again , I'm in Canada). I just try to gave some "touch" with the red color on the letters & "Toyota" emblem. Excuse the pictures quality, but was taken with my crappy phone...

So I got one of the smaller ones from ebay, painted it white and stuck it on, but one problem.

I want to put in a strut brace and I don't know if I'll have the clearance. There's AEM, TRD, Tanabe, and DC but they all look like they want to sit really close to the motor..

Does anyone know if it'll clear?