tC2 Door Visors
#143
Hey I noticed that your visors sit very flush with the line of the door. Mine are not like that: mine arc more after the bend of the window. Did you force yours to stay straight? I let mine curve cause I figure that would not over stress the 3M tape. As if driving daily at 80mph for 20 minutes X2 was not going to stress the tape enough!
#144
DaYUUM/Scion Evolution
SL Member
Thread Starter
Hey I noticed that your visors sit very flush with the line of the door. Mine are not like that: mine arc more after the bend of the window. Did you force yours to stay straight? I let mine curve cause I figure that would not over stress the 3M tape. As if driving daily at 80mph for 20 minutes X2 was not going to stress the tape enough!
i drive in the same conditions and have literally pulled off the visors and stuck them back on with the same tape and only applied pressure. never had any problems. the reason why they were pulled off/reapplied were because the test samples set came in, we pulled off the prototypes, test fit the sample, then put the prototypes back in.
Thread
Thread Starter
Forum
Replies
Last Post