Staggered On tC2 Help?
I was wondereing if any of you guys can help me out on rims? I want to do 19x8.5 or 19x9.5 in the front and then 19x10 or something like that on my 2012 Scion tC and I dont know what would work?
I dont wanna have to do anything to the body of the car. If I can space the wheels with anything thats fine just help me outtt!!! OOO i want a lip too!! |
https://www.scionlife.com/forums/sho...d.php?t=209838
time to read an search...good rule of thumb before asking questions that have most likely been asked numerous times. 9.5 +35 offset has been proven to work all around the car with a nice "flush" fit. Many variables tho. ride height, tire size, wheel offset. Educate yourself and immerse yourself in the stick threads. I only say this bc most ppl with do the exact same thing i did due to not wanted to repeat themselves. I have been going back and forth for months in trying to determine the exact wheel, look, and stance im trying to achieve! GOODLUCK! |
but quick question, why would you go 9.5 front and 10 in the rear. so close, why not match em?
|
Well I have no idea what would be good I am goin with the Tein S-Techs as far as lowering then from there I want my wheels staggered... Just looking to see what would be best in front then what would be best in back. Want the look of fatter lip in back and smaller in front but 19 ' wheels
|
19 X 9 (40-mm offset) all the way around 255/35ZR19s... and don't stagger the wheels...it will screw up the handling. I'm on TRD 1" lowering springs.
https://www.scionlife.com/forums/pic...ictureid=15441 https://www.scionlife.com/forums/pic...ictureid=14321 |
1 Attachment(s)
Stagger it FTW! Lol my handling is just fine and I drive my car hard. However 2tc is right my handling would be even better if I didn't stagger but it's not like I'm auto x my car or swerve threw traffic.
Attachment 36754 |
I'm 18x9.5" all around and I think I'd have room for 18x10-10.5 in the rear. so width is fine, as far as the diameter. I think you will be fine on the S-Tech's if you stagger it, but you're front wheels might need fender roll (don't quote me on the fender roll).
|
Originally Posted by Ryan5x
(Post 4032356)
I'm 18x9.5" all around and I think I'd have room for 18x10-10.5 in the rear. so width is fine, as far as the diameter. I think you will be fine on the S-Tech's if you stagger it, but you're front wheels might need fender roll (don't quote me on the fender roll).
|
Originally Posted by 2tCornot2tC
(Post 4032390)
Yes...but do you have 255s all around?
I can run 19's if I wanted to, but I'd have to raise my car a bit, and I'd still probably need a front fender roll, the rear's are fine for me at 9.5 even if I went 19". |
You do realize you have a FWD car?.....NOT a RWD?
No point in Staggering Wheels...you be a Poser. |
Originally Posted by TeeCizzle
(Post 4032421)
You do realize you have a FWD car?.....NOT a RWD?
No point in Staggering Wheels...you be a Poser. There' are those sayings that people live by: "Form over function" or "Function over form" |
Its the look I want and back in black your ride is ____in sick im staggering haha!!!
|
Originally Posted by DannyRaider
(Post 4032484)
Its the look I want and back in black your ride is ____in sick im staggering haha!!!
Thanks bruh. |
one word for staggered rims on a fwd car...
dont |
Originally Posted by Ryan5x
(Post 4032422)
"Form over function" or "Function over form"
|
All times are GMT. The time now is 02:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands