|
Projector Retrofit
I have been using this forum for a few months now. Although this is my first post I am not new to car modding. I wanted to share my most recent project with all of you. It is my first projector retrofit that I have done and I believe it turned out fantastic. I used all knock off parts. The projectors can be found on amazon for $43 and the hids I also got from amazon for about $30 plus paint. Grand total was under $100 bucks and took me about 8 hours for both headlights. Thanks for looking
Drum roll Please: https://drive.google.com/file/d/0B2Z...ew?usp=sharing https://drive.google.com/file/d/0B2Z...ew?usp=sharing https://drive.google.com/file/d/0B2Z...ew?usp=sharing https://drive.google.com/file/d/0B2Z...ew?usp=sharing https://drive.google.com/file/d/0B2Z...ew?usp=sharing |
and that's cool
|
Originally Posted by jct
(Post 4166092)
and that's cool
|
Looks really nice, wish I had the time and money!
|
Originally Posted by PSYDUCK420
(Post 4166214)
Looks really nice, wish I had the time and money!
|
And throwing them in the oven removing the housing wasn't a hassle?
|
Originally Posted by PSYDUCK420
(Post 4166216)
And throwing them in the oven removing the housing wasn't a hassle?
|
Do you have both high and low beams? also could you give the link for
the projectors? Thanks |
Originally Posted by Sciota
(Post 4170267)
Do you have both high and low beams? also could you give the link for
the projectors? Thanks http://www.amazon.com/gp/aw/d/B00B21R0TA/ref=mp_s_a_1_1?qid=1438014759&sr=8-1&pi=AC_SX200_QL40&keywords=h4+retrofit+projector&dpPl=1&dpID=41BOgW%2BcStL&ref=plSrch |
I was just wondering how these looked installed when you were done! Nice one! :icon_biggrin:
It's actually next to happen when I make my front bumper side markers clear, going to clear the orange out of my headlights and do the projectors. Using the stock headlamps. I got the DEPO's but they looked awful on my car so I returned them. Restoration on them turned out great though! What are the wires for on the projectors? Got photos of how you wired those? |
Originally Posted by StxArOne
(Post 4171038)
I was just wondering how these looked installed when you were done! Nice one! :icon_biggrin:
It's actually next to happen when I make my front bumper side markers clear, going to clear the orange out of my headlights and do the projectors. Using the stock headlamps. I got the DEPO's but they looked awful on my car so I returned them. Restoration on them turned out great though! What are the wires for on the projectors? Got photos of how you wired those? |
Originally Posted by yoson13
(Post 4171040)
The wires on the projector bowl is for the high beam cut off shield. I had already bi-xenon ballasts that had the high beam connectors on them but all you got to do is connect them to your stock h4 connector or get bi-xenon ballasts. I don't have any pics of the wiring, it's all tucked away behind the headlights. To much of a pita to fish them out. There are plenty of diagrams on Google that show you how to hook everything up or if you have any specific questions I can try and walk you through it.
I appreciate the offer on the questions. I might have. I always offer the same thing when I write guides. Mainly because I feel like I'm not being clear enough. Thankiesssssss! :icon_razz: |
Originally Posted by StxArOne
(Post 4171043)
Oh!! Okay safe. No worry about pictures, I didn't know if you took some during the process. Not really a big deal, it's clear enough what to do with them :tongue:
I appreciate the offer on the questions. I might have. I always offer the same thing when I write guides. Mainly because I feel like I'm not being clear enough. Thankiesssssss! :icon_razz: |
YES! I miss a lot of great pictures like that. Plus when your focused on figuring out what your doing, your mind is where it needs to be :)
Edit: I'm a dumb***... I thought the other thread on this was you :icon_redface: |
| All times are GMT. The time now is 09:13 AM. |
© 2026 MH Sub I, LLC dba Internet Brands