Giupo

Hi, How many psi support the small turbocharger (Mitsubishi TF035HL-14GK-6cm2)included in greddy turbo kit?

Thanks

MattyRattyPoo

Im doing .5 -.6 bar

uber-xA-RS2

The turbo can put out a maximum of 16 psi.

At least that's what GReddy says it will do.

Giupo

thank you for the answer..but how many HP at 16psi do you think produce?
I have:

Cp pisons 9,0:1
Pauter rods
Head polished
cams
greddy turbo
Intercooler
Exaust 3"
ECU greddy ultimate with sensor pressure
Fidanza cluch
Fidanza Flywel
Greddy profec-02
Fuel pump 255l/h
obx fuel rail
Injectors 370cc
Fuel pressure regutlator

In Italy I use the Fuel at 100 octane

Thanks

uber-xA-RS2

There are so many variables that will determine your final numbers but if you fully maxed out the turbo with a decent tune you could see anywhere from 200-220 WHP.

In order to achieve that you will need new fuel injectors, fuel pump, and a few extra goodies.

MattyRattyPoo

Your gonna need new sleeves too, but i dunno who makes some

Giupo

Sorry, but I had forgotten myself to insert it in the description.. now the description is modernized :D


Are you sure that I can generate 200-220 hp with Greddy turbo (tf035hl-14gk-6cm2)?

HotBox420

running 9.5 no problems. but most of the time I run 8 for daily driving.