Changing light Auto tranny shift indicator
Have a 2005 XB. The light is out on my Auto Tranny indicator (Bulb that lights the PRND shifter on the floor NOT in the dash).
Does anyone know the bulb# and can anyone give me advice on where the bulb is or how to replace. I did some searches but cannot find anything. Thank you.
Does anyone know the bulb# and can anyone give me advice on where the bulb is or how to replace. I did some searches but cannot find anything. Thank you.
Here's where I got mine.
http://autolumination.com/74.htm
Keep in mind that some of the LEDs might not fit properly. I had to shave down the base of the first LED that I had, in order to get a snug fit in the socket.
The incandescent ones fit great though. They're cheap, buy a couple and find one you like.
http://autolumination.com/74.htm
Keep in mind that some of the LEDs might not fit properly. I had to shave down the base of the first LED that I had, in order to get a snug fit in the socket.
The incandescent ones fit great though. They're cheap, buy a couple and find one you like.
I used an LED strip. I had to cut it shorter and trim some of the plastic in the groove to get it to fit - took out the bulb and used those quick splice things to hook it up. LEDs in the cup holders are also wired to it.
I used an LED strip. I had to cut it shorter and trim some of the plastic in the groove to get it to fit - took out the bulb and used those quick splice things to hook it up. LEDs in the cup holders are also wired to it.
http://www.oznium.com/led-flex-strips
I used the 1.2" flexible led strip in blue. I hooked it up the same as above. You can buy new prindle faces, too.
http://www.nightwerkscustoms.com/ind...x&cPath=18_256
Dennis
I used the 1.2" flexible led strip in blue. I hooked it up the same as above. You can buy new prindle faces, too.
http://www.nightwerkscustoms.com/ind...x&cPath=18_256
Dennis
Did this on my 2006 Xa and it is a 74. The bulb is a little bigger than stock but it does work. You have to seat it really well otherwise it may flicker as the newer bulbs only appear to have one contact per side of the bulb, not four total. You can find this bulb at any auto parts store so skip the online thing to save yourself the hassle.
Now I need to replace a bulb in the AC unit that went at the same time. Seems fishy to me.
Now I need to replace a bulb in the AC unit that went at the same time. Seems fishy to me.
Thread
Thread Starter
Forum
Replies
Last Post
mrsocks
Scion xA/xB 1st-Gen Drivetrain & Power
2
Jan 20, 2015 01:29 PM
Green_rino
Scion FR-S ICE & Interior
1
Jan 20, 2015 01:41 AM
cid_mcdp
Maintenance & Car Care
4
Jan 5, 2015 02:45 PM







