Gen 1 xB foglight issue
#1
Gen 1 xB foglight issue
Hi All,
I have HID fogs (with relays) that recently died. Replaced HID bulbs and ballasts, checked HID wiring, still no go. Bypassed HID kit and wired known good factory halogen bulbs to factory connector/wiring, no go. Narrowing it down to factory switch, or relay...fuse is good. Relay doesn't show pin assignments so I can't test it. Switch has continuity when switched to the "ON" position, but I'm not sure that still qualifies it as good.
I can replace both the switch and relay economically, but is there a usual suspect ... or am I missing something? Thanks.
I have HID fogs (with relays) that recently died. Replaced HID bulbs and ballasts, checked HID wiring, still no go. Bypassed HID kit and wired known good factory halogen bulbs to factory connector/wiring, no go. Narrowing it down to factory switch, or relay...fuse is good. Relay doesn't show pin assignments so I can't test it. Switch has continuity when switched to the "ON" position, but I'm not sure that still qualifies it as good.
I can replace both the switch and relay economically, but is there a usual suspect ... or am I missing something? Thanks.
Last edited by rjsalvi; 11-10-2014 at 07:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Inazuma
Scion xA/xB 1st-Gen ICE & Interior
27
11-05-2005 02:31 AM