Visit the Tech pages for the installation articles:

SPRING INSTALL
https://www.scionlife.com/forums/viewtopic.php?t=20769
COILOVER INSTALL
https://www.scionlife.com/forums/viewtopic.php?t=20764
AIR SUSPENSION INFORMATION
https://www.scionlife.com/forums/viewtopic.php?t=11047

 

Pictures of the final installation would help. I just put in H-tech springs. On the rears, which way is up? I guessed where the writing was right side up. I couldn't find a pic of the installed.

 

thanks it was very helpful

 

Here is more pics of a spring install, hope it helps someone:

https://www.scionlife.com/forums/vie...087&highlight=

 

Thanks for the great spring install instructions! I would suggest that on the xB you do not remove the rear wheels. It is just a waste of time if you have even the smallest idea of what you are doing. If anybody needs decent pictures to help them along the way, the second issue of Siphon has some good ones.

 

DO I NEED TO GET THE CAR ALIGNED AFTER I PUT IN THE SPRINGS?

 

recommended but not required

 

I cant thank this post enough...I used it to install my springs and to remove them and install my stock springs. Thanks alot

 

I got htis message:
The requested page was not found.

when clicking on the spring install link. : (

 

The same result with the other 2 links.

 

I did; I haven't had time to dig around the garage to see if I still have them. I should be able to take a look by tomorrow