Lowered on Eibach Sportlines
#1
Lowered on Eibach Sportlines
Hello,
I've been searching but couldn't find exactly what I was looking for, but would I need any rear shims for being lowered on these? I'm ill be running 16x8 +0 for the rear wheels and 16x8 +20 in the front.
I've been searching but couldn't find exactly what I was looking for, but would I need any rear shims for being lowered on these? I'm ill be running 16x8 +0 for the rear wheels and 16x8 +20 in the front.
#2
Scion xA/xB 1st-Gen Suspension & Handling - Scionlife.com
The sticky posts at the top of this page should have all the information you need. There are so many combinations of springs and tires/wheels that I am sure one of our members have posted up their experience and what they did to make it work.. Good luck and check the post for rear camber/ shims and spacers...
The sticky posts at the top of this page should have all the information you need. There are so many combinations of springs and tires/wheels that I am sure one of our members have posted up their experience and what they did to make it work.. Good luck and check the post for rear camber/ shims and spacers...
Thread
Thread Starter
Forum
Replies
Last Post
SoCal_CJ
Scion xB 1st-Gen Owners Lounge
2
01-27-2023 05:42 PM
SoCal_CJ
Scion tC 1G ICE & Interior
3
12-31-2016 05:13 PM