Liftgate handle needed for 03 Toyota bB. Same as Scion xB?
#1
Liftgate handle needed for 03 Toyota bB. Same as Scion xB?
03 bB
I have heard Scions were imported only a 2004 onwards. Wondering which years will have liftgate handle matching my 2003 Toyota bB?
Is mine 1st Gen? It is RHD. My liftgate handle needs replacement. Anyone have one to sell? White is nice but I can repaint .
*Moved to Correct Forum by Administrator
Sticky Where to Post Your Question
______________________________
Last edited by MR_LUV; 03-21-2019 at 12:25 AM. Reason: Moved to Correct Forum by Administrator
#2
Administrator
SL Member
Administrator
Join Date: Dec 2007
Location: State of Confusion: CA
Posts: 2,583
Yes, Your 03 Toyota bB Liftgate Handle is the Same as as the 2004-2006 Gen1 xB. Widely Available at your local Toyota Dealer.
Over 10 years ago on this very Forum I Identify this as a Poor Scion Engineering Problem and the Membership scoff at me. It broke Twice on
my 2006 xB. Cost me over $90 for the OEM handle each time. Since then, Scion came put with a TSB and admitted their problem.
I believe the TSB is now Expired. You can Purchase from Toyota or Replacements are widely available online. I would have a look at these:
MR LUV
#3
Thanks MR_LUV
I thought that was pretty odd to break that part! Super-human strength? Thanks. I located the part at Rock Auto for 74$ Canadian which is prolly the best I'll find. Thats about $60 us so I'm getting off light compared to your experience .
Thanks for your useful info on my car and the links.
Thanks for your useful info on my car and the links.
#4
Administrator
SL Member
Administrator
Join Date: Dec 2007
Location: State of Confusion: CA
Posts: 2,583
It was a Very Poor, Weak Design to begin with.
Looks like the Same Scion Engineers did the tC1 (2005-2010) Handles (Garnish).
They also had a TSB (Technical Service Bulletin) when many of them also broke.
Personally, I would Recommend the:
They Added a Superior Metal Brackets Reinforcements to help Prevent Breakage and goes for US $39.94
MR LUV
Looks like the Same Scion Engineers did the tC1 (2005-2010) Handles (Garnish).
They also had a TSB (Technical Service Bulletin) when many of them also broke.
Personally, I would Recommend the:
They Added a Superior Metal Brackets Reinforcements to help Prevent Breakage and goes for US $39.94
MR LUV
#5
The metal reinforced bracket is the one we used to replace the plastic OEM part. They even so you don't have to paint it ( I remember the color being a selectable option - may have to search more)
Buy yourself a bunch of plastic rivets at the same time, the inside door cover uses them and they break easily
Buy yourself a bunch of plastic rivets at the same time, the inside door cover uses them and they break easily
#6
Administrator
SL Member
Administrator
Join Date: Dec 2007
Location: State of Confusion: CA
Posts: 2,583
Thread
Thread Starter
Forum
Replies
Last Post
TheBlackPearl
Scion xB 1st-Gen Owners Lounge
22
08-22-2006 06:25 PM
SuperxA
Scion xB 1st-Gen Owners Lounge
4
02-07-2005 09:57 PM