New Headlights What you guys think?
#3
The fitment was spot on. I chose to go with the black housing since i'm doing the whole Envy Green/ Black theme. Though, they also have a clear white housing that might look better on your White.
The only "modification" needed is to splice into the running lights. It's only two wires very straightforward. This gives the power needed for your LED's Halo and Eyebrow.
The wires coming from the Headlights are red and black.
For my scion it was red wire to green/orange wire.
-----------------------black wire to white/black wire. Driver Side.
-----------------------red wire to green wire.
-----------------------black wire to white/black wire. Passenger Side.
I really can't say anything bad about these lights they were everything I expected. Do not expect "more" or "brighter" light though. They use the same 55-65 watt bulb that comes stock. However I talked to a guy at Anzo and he said that I could replace the bulb with an Anzo 65 Watt that would be a "whiter" light making things more easily visible and clearer than a typical yellow light bulb. Anywhere from 55 to 65 watts is safe.
The only "modification" needed is to splice into the running lights. It's only two wires very straightforward. This gives the power needed for your LED's Halo and Eyebrow.
The wires coming from the Headlights are red and black.
For my scion it was red wire to green/orange wire.
-----------------------black wire to white/black wire. Driver Side.
-----------------------red wire to green wire.
-----------------------black wire to white/black wire. Passenger Side.
I really can't say anything bad about these lights they were everything I expected. Do not expect "more" or "brighter" light though. They use the same 55-65 watt bulb that comes stock. However I talked to a guy at Anzo and he said that I could replace the bulb with an Anzo 65 Watt that would be a "whiter" light making things more easily visible and clearer than a typical yellow light bulb. Anywhere from 55 to 65 watts is safe.
#4
Headlights
Looks awesome man I'm actually wanting to do some stuff to my xB but I don't know where to start I've never built a car before and[CODE][[TABLE][/TABLE]/CODE] I kinda want to I have a 3.0 Special Release Series with the Limited Edition Green #477 out of #2200
#7
Loving the lights debating on replacing mine as well did you also replace the grill or just have it out for fitting the lights i personally hate the RS3 grill debating on what to replace it with as well
Scion RS 3.0 #695/2200 (Actual Production 2130)
Scion RS 3.0 #695/2200 (Actual Production 2130)
Thread
Thread Starter
Forum
Replies
Last Post
DjFrOsT
Scion xA/xB 1st-Gen Drivetrain & Power
7
12-13-2003 04:18 AM
DjFrOsT
Scion xA/xB 1st-Gen Suspension & Handling
4
11-06-2003 04:54 AM