blue batmobile's Smoked tail lights on CAMO xB
09-22-2003, 05:52 AM
#1
Member
SL Member
Thread Starter
Join Date: Jul 2003
Location: Orange County
Posts: 79
blue batmobile's Smoked tail lights on CAMO xB
ok to keep things simple, i will post 3 pics here and then give you the link to my webpage where i did a write-up of the whole installation including problem areas to watch out for and other details.
the smoke overlays look great IMO especially on any dark xB.
i think blue batmobile's smoked overlay is not too dark at all, and here is a pic of the tail lights in reverse...plenty of light.
if you have any questions, take a look at this webpage:
http://www.codefusion.org/~legarcia/tail_light_tint.htm
if you have any more ?'s email me, pm me or email blue batmobile.
l. garcia
the smoke overlays look great IMO especially on any dark xB.
i think blue batmobile's smoked overlay is not too dark at all, and here is a pic of the tail lights in reverse...plenty of light.
if you have any questions, take a look at this webpage:
http://www.codefusion.org/~legarcia/tail_light_tint.htm
if you have any more ?'s email me, pm me or email blue batmobile.
l. garcia
09-22-2003, 06:10 AM
#5
Member
SL Member
Thread Starter
Join Date: Jul 2003
Location: Orange County
Posts: 79
yes i applied them as if i was doing window tint. i used a solution of water and dish soap and a water bottle. i dont have a heat gun, but if i did, i would have definately used it. because of the curves of the tail light assembly, it can get tricky...just to let you know ahead of time.
also, check out my write-up on my webpage:
http://www.codefusion.org/~legarcia/tail_light_tint.htm
l. garcia
also, check out my write-up on my webpage:
http://www.codefusion.org/~legarcia/tail_light_tint.htm
l. garcia
09-23-2003, 02:29 AM
#9
Senior Member
SL Member
Join Date: Jul 2003
Location: San Diego, CA
Posts: 2,641
All my Overlays are made from 7 Year High Performance Vinyl, the best stuff. Very durable! Application is peel and stick. Yes, they can be removed=). Click my Link below to view them=).
Bat™
Bat™
09-23-2003, 04:36 AM
#11
Member
SL Member
Thread Starter
Join Date: Jul 2003
Location: Orange County
Posts: 79
its do-able...i did it :D
its a pretty thick vinyl overlay....no spray...its very sticky too, so i dont think it will come off very easily, unless you peel it intentionally.
l. garcia
its a pretty thick vinyl overlay....no spray...its very sticky too, so i dont think it will come off very easily, unless you peel it intentionally.
l. garcia
