Notices
Scion xB 1st-Gen Owners Lounge
First Generation 2004-2006.5 [NCP31]

Looking for back seat release peg caps?

Thread Tools
 
Search this Thread
 
Old May 24, 2010 | 05:34 AM
  #1  
HelloJello's Avatar
Thread Starter
Junior Member
 
Joined: May 2010
Posts: 10
From: Vancouver, B.C.
Default Looking for back seat release peg caps?

Picking up a 2006 XB - Grey interior - but it's missing the 2 peg tops that release and lower the back seats. (They go on the top and screw down on the threads of the pegs) Should I go to a parts shops like Lordco and see if they can order them in or just go directly to Toyota? Do I need the part number to order them? ( I can't seem to find what they are called ) Also, is there anyone on the board that has a XB (or other scion with the same hardware?) they are parting and may have a set for me? Thanks so much!

i'm also looking for a XB rear window wiper blade (just the blade) But I'm guessing that may be easier to find.
Old May 24, 2010 | 06:27 AM
  #2  
Zman's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Aug 2007
Posts: 1,267
From: DubV
Default

Weird how those are missing?

Usually its floor mats, I don't understand how people lose those.


Just kill the rear wiper altogether.
Old May 24, 2010 | 06:42 AM
  #3  
VIP_CAMO's Avatar
Senior Member
10 Year Member
5 Year Member
Big Sky Scion
SL Member
 
Joined: Aug 2006
Posts: 1,946
From: SJ408-KC816-KS913
Default

yeah just go to the dealer ive broke 2 of them allready.i think i paid 6 or 7 bucks each,if you can find them cheaper lmk i broke another one hauling crap again and getting tired of paying so much for them.
Old May 24, 2010 | 11:01 AM
  #4  
WhoKilledTheJAMs's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Mar 2008
Posts: 492
From: West Linda, CA
Default

Standard old-timey door-lock pulls fit on the rear seat releases. In fact, I have these: http://www.mooneyesusa.com/images/aa112mn.jpg
Old May 24, 2010 | 02:27 PM
  #5  
HelloJello's Avatar
Thread Starter
Junior Member
 
Joined: May 2010
Posts: 10
From: Vancouver, B.C.
Default

Cool!- I checked out mooney's site - Aren't they a little long? Does the rest of the seat release peg just unscrew then you replace the whole thing with this?

Thanks!


Originally Posted by WhoKilledTheJAMs
Standard old-timey door-lock pulls fit on the rear seat releases. In fact, I have these: http://www.mooneyesusa.com/images/aa112mn.jpg
Old May 24, 2010 | 09:20 PM
  #6  
VIP_CAMO's Avatar
Senior Member
10 Year Member
5 Year Member
Big Sky Scion
SL Member
 
Joined: Aug 2006
Posts: 1,946
From: SJ408-KC816-KS913
Default

it just screws on.thanks for confirming it works ..
Old May 25, 2010 | 09:49 PM
  #7  
cherry-8's Avatar
Member
10 Year Member
5 Year Member
SL Member
 
Joined: Jun 2007
Posts: 96
From: Northern Virginia
Default

Yesterday when I replaced my windshield wipers I took one of the old ones, moto-tooled it to the right length, and stuck it in the rear wiper. I don't use the rear wiper much, and I can't see any problems arising. It was a friction fit.
Old May 25, 2010 | 10:00 PM
  #8  
WhoKilledTheJAMs's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Mar 2008
Posts: 492
From: West Linda, CA
Default

Originally Posted by cherry-8
Yesterday when I replaced my windshield wipers I took one of the old ones, moto-tooled it to the right length, and stuck it in the rear wiper. I don't use the rear wiper much, and I can't see any problems arising. It was a friction fit.
I just replaced my blade with that from a Bosch Micro Edge Excel blade. In addition, I know from unfortunate experience that whatever cheapo Autozone brand of blade does not fit the rear wiper arm (there were a lot of choice words when I figured that out).
Old May 26, 2010 | 05:41 AM
  #9  
Gothbox's Avatar
Senior Member
10 Year Member
5 Year Member

SL Member
Scion Evolution
 
Joined: Jun 2004
Posts: 2,726
From: Over there
Default

Originally Posted by HelloJello
Aren't they a little long?
if you are worried about them being too long you can just cut them down some.
thats what I did to mine back in the day when I figured out that the door locks would work. And it adds a little custom touch to the car. Its the small things thats cool to me.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mischman
PPC: Misc and Lots
3
Jan 14, 2015 06:07 PM
evolving_machine
Introduction Forum
6
Jan 13, 2015 08:04 PM
eric_m
Scion tC 1G Owners Lounge
32
Oct 29, 2007 07:37 PM
tenten
Scion xA/xB 1st-Gen ICE & Interior
1
Nov 24, 2003 05:46 PM
Roach
Buyer / Seller Experiences
2
Aug 17, 2003 03:06 AM




All times are GMT. The time now is 03:58 PM.