does anyone know the the
highest hp posible with the xB
it would be nice to have a all round car

 

mine was installing tien s-techs

 

The biggest dyno numbers I have seen, have been right around 150whp. Thats with a great deal of work + turbo. As for first mods, I will have about 6 that I will do when I get my scion. So I just got to figure out what part will be the first to put on

 

Nite Shades on the Tail Lights!

 

I took the stock intake apart and removed the resonator right after the MAF sensor to improve the amount of airflow. I bought a 2 in to 2 in rubber connector used to join pvc pipe and extended the length of the stock intake pipe to relocate it lower and further away from the engine. I also put a temperature sensor in the the intake pipe to monitor air temp. I don't have a dyno or the means to use one but I can feel a difference by the "seat of the pants". I plan to put a stiffer anti-roll bar in the rear to improve handling. And further down the road... better tires. My member page is jblack5, you can find pictures of the setup and the results.

 

I got springs, short shifter, clutch from the dealership. My first mod I did on my own was intake, then rear sway bar, later header, then after that exhaust. next on the list is Blitz compressor, further down the road some wheels and tires.

By the way, there are alot of "what was your first mod" threads, try searching

 

Tint by the third day of ownership, Spy springs and Exel TZ-10s before my xB was a month old. The Spy springs were on back order.

 

NONE yet!!! but i think the first will be headlights. . . (only thing i have for the car!) lol

 

My first mod was the wheels and tires
around 200 at the crank with a turbo and nitrous. BTW if you want a ROUND car get the xA