City Lights
#1
City Lights
headlight: its whats for dinner
____.
A old damaged headlight from another incident was baked open, and I painted the housing.
I used Randode's LED controller to control the LED's -- only one ground worked because I fired it (oops) but i'll fix it soon.
My install job kinda sucked... I did find white Silicone but the bottle broke along the seal at the bottom, so I had to apply with a knife.
(notice how when i drilled -- i knicked the ring along the headlight? Yup.... time to find some angel eyes.)
My wiring goes along the bumper area, (where the styrofoam is) You can't see it in the above picture (because its before I wired it up properly) but the controller is ziptied under the DR side headlight, on the bumper base. I'll be sure to take pics when I put the next controller/finish the middle LED's though...
xbbryon.com =)
#3
i was waiting for someone to do the white headlamp housing i did mine black...such a pain in the aass. but yeah nice job with the LED's. i wanna try to do an Audi R8 thing with like a string of em across the bottom
#5
Originally Posted by devastator
i was waiting for someone to do the white headlamp housing i did mine black...such a pain in the aass. but yeah nice job with the LED's. i wanna try to do an Audi R8 thing with like a string of em across the bottom
https://www.scionlife.com/forums/viewtopic.php?t=228486
I wanted to use superflux LEDs, since I like them so much It's hard to find places to drill with such big lights... Just be careful, because once you bake em, you need to keep in mind where the black housing goes in relation to the reflector housing and lens....
Thread
Thread Starter
Forum
Replies
Last Post
gyiu
Regional - Pacific South
12
02-20-2015 04:20 PM
TheTripleC
PPC: Vehicles
1
01-04-2015 06:46 PM