08 xB DIY Ram Air Intake part needed..
#1
08 xB DIY Ram Air Intake part needed..
Hello everyone. I am piecing together a short ram air to increase mpg a little bit but I'm having trouble finding an adapter to mount the MAF.
Does anyone know where I can either get an adapter or the short pipe with it already built in for less than an arm and a leg?
Thanks in advance!
_______
Does anyone know where I can either get an adapter or the short pipe with it already built in for less than an arm and a leg?
Thanks in advance!
_______
Last edited by MR_LUV; 03-25-2019 at 09:35 PM.
#3
Exactly this ^^^
Order one of the Ebay intakes and use the section that has the MAF mount in it. That's what I did when I built my intake. You can see in the shot below when I used the first portion and then just cut it to the length I needed to work with the rest of the intake.
Order one of the Ebay intakes and use the section that has the MAF mount in it. That's what I did when I built my intake. You can see in the shot below when I used the first portion and then just cut it to the length I needed to work with the rest of the intake.
#6
Exactly this ^^^
Order one of the Ebay intakes and use the section that has the MAF mount in it. That's what I did when I built my intake. You can see in the shot below when I used the first portion and then just cut it to the length I needed to work with the rest of the intake.
Order one of the Ebay intakes and use the section that has the MAF mount in it. That's what I did when I built my intake. You can see in the shot below when I used the first portion and then just cut it to the length I needed to work with the rest of the intake.
Thread
Thread Starter
Forum
Replies
Last Post
TheDeanMachine
Scion xB 2nd-Gen Drivetrain & Power
6
04-28-2014 11:39 AM
Philip-tc
Scion tC 1G Drivetrain & Power
6
07-30-2010 09:46 PM
09XB24
Scion xB 2nd-Gen Drivetrain & Power
6
12-19-2008 08:31 PM