Complete Dash Kit
12-07-2007, 02:12 PM
#1
Member
Thread Starter
Join Date: Dec 2007
Location: Austin, Texas
Posts: 45
Complete Dash Kit
What do you think?
http://cgi.ebay.com/ebaymotors/2008-...spagenameZWDVW
What would be the best color/look for the 08' XB interior?
Black Carbon Fiber, Gun-Metal Carbon Fiber or Brushed Aluminum?
Personally... I want the Brushed Aluminum, as the Gun-Metal Carbon Fiber is just too shiney and the Black Carbon Fiber is well... BLACK and so is the rest of the dash!
http://cgi.ebay.com/ebaymotors/2008-...spagenameZWDVW
What would be the best color/look for the 08' XB interior?
Black Carbon Fiber, Gun-Metal Carbon Fiber or Brushed Aluminum?
Personally... I want the Brushed Aluminum, as the Gun-Metal Carbon Fiber is just too shiney and the Black Carbon Fiber is well... BLACK and so is the rest of the dash!
12-07-2007, 02:49 PM
#2
Senior Member
SL Member
Join Date: Oct 2007
Location: San Diego, CA
Posts: 615
I saw that auction and it got me sort of interested too. I like the brushed aluminum the best too. I'd like to see it installed though because with all those pieces it might end up looking a little tacky. Might be overkill...
12-07-2007, 02:56 PM
#3
Member
Thread Starter
Join Date: Dec 2007
Location: Austin, Texas
Posts: 45
Yeah... I sent the seller a question in regards to just that.
I told him that I was interested in the kit, but wanted to see how it looks first.
As far as over-kill. You always have the option to not apply particular pieces.
I told him that I was interested in the kit, but wanted to see how it looks first.
As far as over-kill. You always have the option to not apply particular pieces.
12-07-2007, 06:38 PM
#5
Junior Member
Join Date: Oct 2007
Posts: 9
I am pretty sure I actually saw this kit installed on a dealer demo car when I went to pickup my B. it definitely caught my eye and I found it appealing...at first.
I looked at it again a couple weeks later when I picked up my tag and had a chance to examine it more closely. Overall, its nice - I will say that. But in one aspect the more I looked at it the "cheaper" it looked.
The pieces are about an 1/8th of an inch thick - maybe a little more. They get close to the edges of all the pieces they cover but you can definitely tell they are simply stuck on top of something. They look "rubbery" (if that is even a word) because of the clear coat being so thick.
Overall - as with every custom item...to each their own. The quality of the kit did look nice and the pieces were definitely secure but after the first glance it quickly lost its appeal. I was seriously interested in it since I want to do something like this but I think I am leaning towards the PatternTek option. That is significantly more expensive than this option so it may not appeal to everyone or even be an option.
Just my $.02
Quick edit - To clarify it was the Gun-metal carbon fiber kit they installed. Another pattern may look better. They had all the pieces installed and it was WAY overkill.
I looked at it again a couple weeks later when I picked up my tag and had a chance to examine it more closely. Overall, its nice - I will say that. But in one aspect the more I looked at it the "cheaper" it looked.
The pieces are about an 1/8th of an inch thick - maybe a little more. They get close to the edges of all the pieces they cover but you can definitely tell they are simply stuck on top of something. They look "rubbery" (if that is even a word) because of the clear coat being so thick.
Overall - as with every custom item...to each their own. The quality of the kit did look nice and the pieces were definitely secure but after the first glance it quickly lost its appeal. I was seriously interested in it since I want to do something like this but I think I am leaning towards the PatternTek option. That is significantly more expensive than this option so it may not appeal to everyone or even be an option.
Just my $.02
Quick edit - To clarify it was the Gun-metal carbon fiber kit they installed. Another pattern may look better. They had all the pieces installed and it was WAY overkill.
12-10-2007, 09:56 PM
#7
Senior Member
SL Member
Join Date: Sep 2006
Location: Miami
Posts: 368
Heres some pricing in case anyone was wondering. We are no doubt a step up from stick on. And we offer OEM paint code matches. No Rattle cans here, we use Automotive Spray guns.
You will need to send us your OEM parts since we do not have cores just yet.
Description / Price
DOOR HANDLE $26.56
HANDLE POCKET $18.87
Gauge Trim $156.19
S/W Trim $ 10.25 each
Door window switches $ 49.12 each
Vents $ 15.98
Oval radio surround $ 93.29
Left console strip $ 21.09
Guages top of dash $ 39.12
Upper shifter surround $ 34.25
Lower shifter surround $ 74.75
Dome light $ 27.46
Engine Shroud $372.09
Engine cover $150.02
Fuse Cover $ 87.75
Fluid Caps $ 8.74 each
You will need to send us your OEM parts since we do not have cores just yet.
Description / Price
DOOR HANDLE $26.56
HANDLE POCKET $18.87
Gauge Trim $156.19
S/W Trim $ 10.25 each
Door window switches $ 49.12 each
Vents $ 15.98
Oval radio surround $ 93.29
Left console strip $ 21.09
Guages top of dash $ 39.12
Upper shifter surround $ 34.25
Lower shifter surround $ 74.75
Dome light $ 27.46
Engine Shroud $372.09
Engine cover $150.02
Fuse Cover $ 87.75
Fluid Caps $ 8.74 each
Thread
Thread Starter
Forum
Replies
Last Post
clickclickw00t
PPC: Interior / Electronics
2
02-18-2015 08:57 PM
carid
Exclusive Sponsored Sales
0
01-30-2015 02:23 PM
TheTripleC
PPC: Vehicles
1
01-04-2015 06:46 PM
