Scion xB2: High Power LED Reverse Light version 2.0 [08-10]
#1
Former Sponsor
SL Member
Thread Starter
Join Date: Apr 2006
Location: Anaheim, CA & Las Vegas
Posts: 2,093
Scion xB2: High Power LED Reverse Light version 2.0 [08-10]
Scion xB2 : High Power LED Reverse Light version 2.0 for 2008-2010
* Free shipping within US
- Most powerful LED bulb with extreme reliability
- Multi-chip SMD technology for maximum brightness
- Large aluminum heat sink for long term use and extended reliability
* NOTE for 2011 and up model: Scion change the reverse lights on 2011 to two smaller bulb.
We are in the process of making another design to fit that model. (Coming Soon...)
Check out the prototype from here
- Direct link to the ordering page
Note : They are pure white in person, camera makes it look bluish
Untouched photo below (with ambiant lighting)
* Free shipping within US
- Plug and play
- Bright HID White
- High power but uses1/5th of the stock bulb power
- Low heat, will not burn or melt the stock socket
- Very long-life
- 1-year hassle free warranty (just return it and we'll send you replacement free of charge)
- Most powerful LED bulb with extreme reliability
- Multi-chip SMD technology for maximum brightness
- Large aluminum heat sink for long term use and extended reliability
* NOTE for 2011 and up model: Scion change the reverse lights on 2011 to two smaller bulb.
We are in the process of making another design to fit that model. (Coming Soon...)
Check out the prototype from here
- Direct link to the ordering page
Note : They are pure white in person, camera makes it look bluish
Untouched photo below (with ambiant lighting)
Last edited by LEDmod; 02-25-2012 at 04:46 PM.
#8
Former Sponsor
SL Member
Thread Starter
Join Date: Apr 2006
Location: Anaheim, CA & Las Vegas
Posts: 2,093
#9
Former Sponsor
SL Member
Thread Starter
Join Date: Apr 2006
Location: Anaheim, CA & Las Vegas
Posts: 2,093
#13
Former Sponsor
SL Member
Thread Starter
Join Date: Apr 2006
Location: Anaheim, CA & Las Vegas
Posts: 2,093
#15
I would love to get some for my reverse lights and if they can replace the wedge type bulb in the parking light socket in the headlights, I'd love to get 2 for the front as well. Hit me up if the specs match up and I'll be ordering straight away. Aloha!
#16
Former Sponsor
SL Member
Thread Starter
Join Date: Apr 2006
Location: Anaheim, CA & Las Vegas
Posts: 2,093
What kind of specs do you need??
#17
Former Sponsor
SL Member
Thread Starter
Join Date: Apr 2006
Location: Anaheim, CA & Las Vegas
Posts: 2,093
Sorry don't have lumen rating on this...
You can't really decide the LED bulb from lumen rating, since most of the are inaccurate rating...
One of the main reason is that, LED bulbs usually have LED is multiple direction..
Also depends on the viewable angle of the LED will change the lumen rating completely...
Example with two LED that has same power output.. 30 degree will have mutiple times more lumen then 120 degree angle...
You can't really decide the LED bulb from lumen rating, since most of the are inaccurate rating...
One of the main reason is that, LED bulbs usually have LED is multiple direction..
Also depends on the viewable angle of the LED will change the lumen rating completely...
Example with two LED that has same power output.. 30 degree will have mutiple times more lumen then 120 degree angle...
#18
I need at least 2 of a 168 (or 194 I think) wedge type bulb for my parking lights/license plate bulbs, 2 of 921 type for my reverse lights (the 2011 has reverse lights in each tail light instead of the single offset one in the bumper), and if those switching turn signal bulbs that you have will fit the turn signals for a 992 or 7440A bulb, then I would want two sets (4 total bulbs) to switch those. Please let me know. Thanks. Aloha!
#19
Former Sponsor
SL Member
Thread Starter
Join Date: Apr 2006
Location: Anaheim, CA & Las Vegas
Posts: 2,093
I need at least 2 of a 168 (or 194 I think) wedge type bulb for my parking lights/license plate bulbs, 2 of 921 type for my reverse lights (the 2011 has reverse lights in each tail light instead of the single offset one in the bumper), and if those switching turn signal bulbs that you have will fit the turn signals for a 992 or 7440A bulb, then I would want two sets (4 total bulbs) to switch those. Please let me know. Thanks. Aloha!
You can use 194 bulbs, but most of them aren't as bright as the 7440 size
I do have some much bigger size LED then typical 194 LED...
For the license plate light, I sell four 4-chip LED which fits perfectly in the xB2 license plate housing... also the brightest for it's size....
You should consider getting dual color for the front turn signal..
http://store.ledmod.com/index.php?ma...products_id=72
#20
So the bulb depicted in this thread will not work in the reverse lights or the parking lights? Sorry, I'm a bit confused. If I ordered four of the bulbs that you pictured in the original post for this thread, would I be able to use them in the parking light and reverse light sockets? I also am a bit confused about how the turn signal lights would work. It says plug and play, but there is also mention of a relay. Would I just replace the OEM socket with the one you provide, or do I also need to wire in a relay to prevent the hyper flashing? Wiring the relay is not something I've done before, so I might be hesitant to mess with that. I've also been warned by several other guys that the turn signal lights should not be messed with (melting, hyper flash, dead lights after a short time). Any more help would be appreciated. I can also call the number if that is easier and talk to someone. I am in Hawaii, so let me know what time to call if so. If the bulbs work for the sockets I have, I would order 4 turn signals, 4 of the wedge type bulb in this thread, and 2 license plate lights as well. Thanks for your time. Aloha!