ArockXB

Hi, names Justin. Haven't been on the forums much but here's my 2011 xB. Its sitting on Ksport coilovers, 18x9.5 LM Reps all around w/ a 35+ offset, and stretched on 215/40's . Well here's some pics. Sorry for bad quality and size.

http://youtu.be/XoqaqxsBdww

Was that then this....



As she sits now...

A quick roller...




Here's some updated pics of my car, sorry i havent posted on here in a while guys.

papo

That thing needs to be pancaked on the floor.

flyingemu05

whoa. whats the front poke look like?

ArockXB

Haha, i wish i could slam it more, the fender tabs are like 3 inches from the ground and if i go any lower ill have to flare the fenders. Im not a fan of flares.

But the fronts poke JUST A LITTLE bit more than the rear but the front fenders are gonna be pulled slightly to poke just the same as the rears. I have no turning issues or anything them them either.

xseveredveganx

That's the craziest thing with these cars: you can fit decently aggressive if you're gutsy enough to try.
My fronts poke more than the rear, but my rears are pulled.
Looks good! More pics!

ArockXB

Thanks! && here's some moar pics ....
These are from a few weeks ago, i forgot about these.

BIGShawn

have you done any fender work? any rubbing? Im thinking of going 17x10 +20 with 215/45 on my wifes, which is almost the same setup as you. Shes on df210 but i want to see how much work its gonna be. Please let us know what you had to do to get these on, and how much of a drop you have.

Darrenohooligan

Mad props on the setup! Looks great! Glad to see some more aggressive fitments out there.. I just took of my 17x9 +20. I couldn't go as low as I wanted i was rubbing like mad.. It's crazy, you look much lower than me.. surprised you don't rub... I ended up with some cheap 18s for a set of 225-40s I had in the backyard, now it's tucking.. and rubbing on full turns, but hey if it don't rub, it don't fit!!!

xseveredveganx

I think we need to start an official aggressive fitment thread...

A dude is selling a set of these, locally, for $750 with tires.

ArockXB

From the pics that you guys see, there's no fender work done at all at the time of taking those pics. I rubbed on occasional bumps without fender work but with rolling the tab on the front and rear fenders and a slight pull on the front, NO FLARES, they fit perfectly.
I like stretching and poking, as long as your careful, anyone can push the limits. I feel like anything by 10+25 is kinda pushing it but i love the set up and I dont think theres much people on this forum even running 18x10 all around on a xb2, so its a little different, yah know ?

&& I got a crazy drop from those ksports. I still have like 4 inches i can go lower, but that wont be possible because im not tryna screw up my body that badly yet. Haha. All I want to do is get my car low enough to tuck some tire and sit pretty close to the side wall on the tire stretch. Plus i have my coilovers as stiff as they can and i rarely bottom out or anything like that.

xseveredveganx

I've been running 19x9.5 +25mm, but I'm confident I can run 19x10.5 +25mm without a problem.

ArockXB

Do your fenders flare or anything ? what fender work do you have done?

xseveredveganx

Rolled the rears, very slight pull, and I flipped the fender liner to the inside lip of the fender on the front.

ArockXB

Oh wordd. Yeah the way they fit w/o fender work was like perfect, i just needed a roll on the rears and pull on the front, so i could go lower about another inch.

lefty29er

Lookin' GOOD

Jay Blaze

this is wild!!! love the setup man!!! very nice work

Zsanz

reporting for aggressive fitment thread, because aggressive fitment is aggressive.

love2accelerate

not really that good =P justin go to cars inc and they will fix it for u

Phobic

iTrader: (2)

sick setup, not a fan of the blue lugs, but the gold on army rock is bad ___.

hengly

sweet ride and those are some dope wheel.