Hey guys Thought I would get you a teaser shot of my new stance. XXR 522's 19x10 +20 Cambered at -3 in the picture might go to -5 so with my k sports it will be -6 total. The Camber R&D isn't finished but Dan is working on it!

the front stance is projected at 19x8.5 +15 cambered at -2 via K-sports.

I'll get a full car shot as soon as I can get some rubber on the wheels. I still need to figure out if I need stretch in the front but the back is going to to be stretched on 10-235-40's.

Pictures by DANCAR at RealCamber.com

 

That's cool for fronts, but what about the back? It's non-adjustable via Ksports.

 

Man thats crazy fitment in the rear. You might need to pull the fenders a bit

 

K sports have camber plates. So I can adjust them a little bit.

That pictures is actually the rear at -3 I really want to avoid pulling the fender because my car has a custom paint job that I really don't want to pay to have repaired lol. I might go -5 worst case but it looks like if I get the right tire and roll the fenders then I might just make it.

 

You will be able to pull your fender also with no problems. I pulled and rolled the crap out of my S and it was fine. You need some better pics you teaser !!

Just make sure you aligne your car to adjust the toe as much as you can so the life can last you some.

 

You can pull them without damaging the paint I belive. Looks mega sick. Props to ya!

 

How are those 8.5s up front fitting. I'm stilling thinking of going 9.5 in the front.

 

yup heat gun and patience

 

You might be able to get away with a 9.5 you just have to get the right offset. My 8.5's offsets will actually give me a little poke.

 

yeah the offset I want to get is a +38. My other option is to _____ out and get a 8.5 +44 and that will actually sit inside the fender, not flush.

 

That's gonna look sick Pasquale!!! Can't wait to see the finished product!
I wish they had my wheels in 10 and not 10.5 =0(

 

I wish they had mine in a 10.5 hahaha. I was going to get the 521's those come in 10.5 but its a step lip so I might have been able to swing it but Im really happy with this fitment.

 

Looks nice man. What are you using to get the camber and where did you get it. I am running 16x8s with a +0 offset. Thanks

Chrio

 

I'm test fitting for a company called realcamber.com once we work all the bugs out Jersey will be able to be purchased off that site.

 

Thanks man.

 

Any more updates Pasquale ? Im dying to see this thing cambered out man !!

 

Im still looking around for tires lol...so expensive ><!!

I do have another picture update you guys might be interested in LOL.

Just to hold you over a little longer.



Thanks to Manny and all the guys down at Wilwood!

 

Dude all Im getting is teased in here, if I wanted that I'd kick it with my girl LoL.

Go to discountwheelwarehouse.com they have tires on the cheap there.

 

Or directbuytire.com

 

Soooo, Dan's making camber shims!? !?!?!!?!? :D