XBNERD - my name is Casey and I am a nerdaholic
Thread Starter
Member
SL Member
Joined: Sep 2009
Posts: 53
From: Hawthorne, CA
XBNERD - my name is Casey and I am a nerdaholic
Whats up people.... i dont post much here but i do post on a lot of other sites about the nerdy crap I do, the HFD family and my xB build i have been doing for about 2 years now that some say is VIP, some say is weak and some that some other stuff but i dont listen to people all that much... so this is a bit about my build and if you want to know more just ask and I pretty good at sharing the nerdy ish I do..... Love, peace & hair grease!
after a few mods this was how my xB sat in 2009 until October of the next year which was when I said to myself lets nerd this box up a bit
I dont want to post a ton of pics but after that it was a year a later before i started to rebuild my Work Equips and go a lil bit VIP.... and then it was on
31 December, 2010 - stance, and a few bits more
21 August, 2011 - me and the xB
my interior as it sets pretty much now......
I got a lot more pics but here is breakdown of some of my mods...
5 Spoke Work Equips 17x8, 17x9
Muteki SR48 Titanium Open End Lug Nuts
East Street Air Suspension w/digital controller
JDM Rumion hatch handle
JDM Rumion a/c chrome covers (discontinued)
JDM Rumion a/c **** covers
JDM Rumion chrome door handles
JDM Rumion Tail lights
JDM Rumion licesne plate lamp housing & LED's - Super bright white
JDM Chrome Rear Windshield Wiper (only known one in the USA)
Strup Stainless Steel Header
Injen Black CAI (cold air intake)
Tanabe Strut Bar
Tanabe Concept G Exhaust
JDM Style Rain Visors
Shark Fin Antenna
12k Purple HIDs
NIA eyelids
Scion Pro xG Upper Rear Spoiler
Scion Pro Stainless Steel Window Trim
2ZERO6 Front License Plate Mounts
schonbek Swarovski Spectra crystal flushmount chandelier
(modified to fit as dome light with Oznium blue LED board)
Nardi Woodgrain 360mm Gold Steering Wheel
NRG Tilt Steering Wheel Hub
Junction Produce Mission Neck Pads x4
Junction Produce Large Fusa
Junction Produce Large Kitsuna
Junction Produce Curtains x2
Junction Produce Leather Seat Belt Covers
Junction Produce Hello Kitty Air Freshener
450mm rear view mirror with Junction Produce Emblem
Vip wood table - passenger side
Garson Table Coasters
Custom made VIP table in hatch/trunk
Carmate - Galahad black/chrome tables in rear windows
Clazzio (JDM) Cross Stitched seat covers
handmade chenile headrest covers
handmade chenile sun visor covers
Oznium leds in a/c vents
JDM 350mm bubble Shifter
Custom Suede headliner
custom wrapped door panels
Oznium Cathodes under front & rear seats - blue
Custom switch panel buklt into dash
Custom painted dash, a/c vents, panels etc.
Custom in dash LED swap to white
Pioneer AVIC-F90BT head unit
MTX Jackhammer Enclosure JH5512X2D (2 x 12" 1000RMS subs)
MTX1000XD 1000RMS Amp
a few random pics...
after a few mods this was how my xB sat in 2009 until October of the next year which was when I said to myself lets nerd this box up a bit
I dont want to post a ton of pics but after that it was a year a later before i started to rebuild my Work Equips and go a lil bit VIP.... and then it was on
31 December, 2010 - stance, and a few bits more
21 August, 2011 - me and the xB
my interior as it sets pretty much now......
I got a lot more pics but here is breakdown of some of my mods...
5 Spoke Work Equips 17x8, 17x9
Muteki SR48 Titanium Open End Lug Nuts
East Street Air Suspension w/digital controller
JDM Rumion hatch handle
JDM Rumion a/c chrome covers (discontinued)
JDM Rumion a/c **** covers
JDM Rumion chrome door handles
JDM Rumion Tail lights
JDM Rumion licesne plate lamp housing & LED's - Super bright white
JDM Chrome Rear Windshield Wiper (only known one in the USA)
Strup Stainless Steel Header
Injen Black CAI (cold air intake)
Tanabe Strut Bar
Tanabe Concept G Exhaust
JDM Style Rain Visors
Shark Fin Antenna
12k Purple HIDs
NIA eyelids
Scion Pro xG Upper Rear Spoiler
Scion Pro Stainless Steel Window Trim
2ZERO6 Front License Plate Mounts
schonbek Swarovski Spectra crystal flushmount chandelier
(modified to fit as dome light with Oznium blue LED board)
Nardi Woodgrain 360mm Gold Steering Wheel
NRG Tilt Steering Wheel Hub
Junction Produce Mission Neck Pads x4
Junction Produce Large Fusa
Junction Produce Large Kitsuna
Junction Produce Curtains x2
Junction Produce Leather Seat Belt Covers
Junction Produce Hello Kitty Air Freshener
450mm rear view mirror with Junction Produce Emblem
Vip wood table - passenger side
Garson Table Coasters
Custom made VIP table in hatch/trunk
Carmate - Galahad black/chrome tables in rear windows
Clazzio (JDM) Cross Stitched seat covers
handmade chenile headrest covers
handmade chenile sun visor covers
Oznium leds in a/c vents
JDM 350mm bubble Shifter
Custom Suede headliner
custom wrapped door panels
Oznium Cathodes under front & rear seats - blue
Custom switch panel buklt into dash
Custom painted dash, a/c vents, panels etc.
Custom in dash LED swap to white
Pioneer AVIC-F90BT head unit
MTX Jackhammer Enclosure JH5512X2D (2 x 12" 1000RMS subs)
MTX1000XD 1000RMS Amp
a few random pics...
what up casey, can you post some pics of your jp seatbelt covers, i wanted to see how this would fit on our car, looked like they were to long. And lets see the new rear vip table. Thats what i've been working on lately. 
Thread Starter
Member
SL Member
Joined: Sep 2009
Posts: 53
From: Hawthorne, CA
thanks everyone for the kinds words..... i like it
what up dude! Yeah the JP covers are kinda long on the front seat belts so I run them in the back and they fit fine.
I will post pics of the table (i chopped up a coffee table LOL) and the the look from the front so you can see the covers in the next couple days.
I will post pics of the table (i chopped up a coffee table LOL) and the the look from the front so you can see the covers in the next couple days.
