ok so i have a set of 19 X 7.5 Rims with a 42mm offset...i also have a set of skunk2 drop springs on there...what would be a good size spacer for me to put back there to have everything looking right...

 

10mm would be perfect to match the fromt.

i hope you plane on using hub spacers and not wheel spacers!

 

i dont know anything about spacers...whats the difference between the hub spacers and wheel spacers???

 

go to onetongarage.com and click on scion rear spacer shims, basically they push out the entire hub essembly, wich is a safer alternative to wheel spacers. these are highly recommened by the scion life community so you cant really go wrong with these. i have them and i feel they drastically improved the look of my rear tire set up

 

are they hard to install???

 

not at all

 

i got mine from keoki , a SL member that sells them at a good deal.

 

The 10mm OTG spacers will bring the rears out to within about 2.5 mm of the fronts. Inorder to match perfectly the spacers would need to be 1/2".

 

cool, so i have seen 15mm spacers in the past, is that the same as 1/2"

 

no, 1/2" is about 12.6mm
15mm is almost 5/8"

 

15mm is close enough for me.

 

i just installed minw on saturday.

https://www.scionlife.com/forums/vie...96438f9740ddc7