Got some new feet......(56K umm not so much)
Thread Starter
Member
SL Member
Joined: Aug 2007
Posts: 88
From: Classic xB Driver
Got some new feet......(56K umm not so much)
For those who don't know they are Sportmax 504's / 18x8 / +32 offset. Tires are Nitto Neo Gen 215/40/18. I'm running 10mm OTG spacers in the rear with slightly rolled fenders and I'm on Hotchkis springs. I haven't noticed any rubbing yet if anyone is wondering. 
Senior Member
SL Member
Joined: Feb 2006
Posts: 298
From: Santa Ana - The Ghetto OC
wow very cool wheels!!
how do you roll the fenders by the way
i got 962's with 215/35/18 tires
and Tanabe DF210 springs
i want to get the 10mm spacers but i think
its gonna rub for sure
any suggestions??
how do you roll the fenders by the way
i got 962's with 215/35/18 tires
and Tanabe DF210 springs
i want to get the 10mm spacers but i think
its gonna rub for sure
any suggestions??
Thread Starter
Member
SL Member
Joined: Aug 2007
Posts: 88
From: Classic xB Driver
Originally Posted by OC_ScionBox
wow very cool wheels!!
how do you roll the fenders by the way
i got 962's with 215/35/18 tires
and Tanabe DF210 springs
i want to get the 10mm spacers but i think
its gonna rub for sure
any suggestions??
how do you roll the fenders by the way
i got 962's with 215/35/18 tires
and Tanabe DF210 springs
i want to get the 10mm spacers but i think
its gonna rub for sure
any suggestions??
Check these out:
https://www.scionlife.com/forums/viewtopic.php?t=148795
https://www.scionlife.com/forums/viewtopic.php?t=19730
Senior Member
Scikotics
SL Member
Joined: Jun 2005
Posts: 2,043
From: Broken Arrow, OK
How was the hotchkis spring install? Did you run into any problems? My brother in law just asked me if i could change the springs out on his xB. I've done a few sets of DF210s with no problems, but on my tc with Hotchkis, I ran into problems compressing the springs because the rear coils were too small to fit a compressor into. I was just wondering if there was any problems with the xB.
Senior Member
SL Member
Scion Evolution
Joined: Aug 2004
Posts: 6,564
From: Chino, CA
Originally Posted by joshboogie
Yeah I'm not into the over the top stuff. I'm headed in the VIP direction even though that was never the intention. lol
but get some more expensive wheels for VIP. :D
Originally Posted by all4degame
How was the hotchkis spring install? Did you run into any problems? My brother in law just asked me if i could change the springs out on his xB. I've done a few sets of DF210s with no problems, but on my tc with Hotchkis, I ran into problems compressing the springs because the rear coils were too small to fit a compressor into. I was just wondering if there was any problems with the xB.
