rims for an xa, 18s
ha all, i just put my xa down 2 in. and im looking to get rims. ive looked at the buyers guide and alot of posts and see alot of info on tc and ab, not so much for xa. i dont know if i just over looked it or sometihng. anyway, id like to put 18s on with a 215 40 18 with a 42mm offset. will this work? if not what would be a good set up? id like to fill the gap as much as i can with out rolling the finders. - ryan
I have a 18x7.5 with a 42mm offset and a 215/35/18 tire
with the OTG 10mm spacer in the rear. I also have about a 2 inch drop. It doesnt rub in the front at all.It you want it to be more flush with the outside of the body you will need to go with more offset on the rims!
with the OTG 10mm spacer in the rear. I also have about a 2 inch drop. It doesnt rub in the front at all.It you want it to be more flush with the outside of the body you will need to go with more offset on the rims!
Originally Posted by Persocon
7.5 is no problem. If you want it to look flush, I would suggest 5mm spacers all the way around, or even 10mm in the rear.
so, if i didnt wont to use any spacers would i need a 52mm off-set or a 32mm off-set?-ryan
Thread
Thread Starter
Forum
Replies
Last Post





