I was wondering if anybody knows anything about the Tanabe NF 210 springs. I have sportmax 002's with a zero offset 15x8. I wanted to lower it more than the TRD springs and these are 1.7 (f) and 1.5 (r). If anybody that has this set can let me know if these would work that would be great. I don't want to have to worry about rubbing and I think that 2" in the rear would be to much.

thanks

 

you may rub in the rear, especially with the tire size you want. most likely, you will need to roll the fenders

 

it depends on what tires you are running, stocks will probably rub. If you go with a low profile you should be ok. Do you have passengers a lot? If not, no worries.

 

It turns out that according to Tanabe the spring will lower the front 1.7 and the rear 1.2. I don't carry passengers very often. I am torn between 195/50 and a 205/50.

 

I had the NF springs on for a couple of years and really liked them. They seemed to settle more than that though.

 

195/50