DIY strut tower brace
I just made a less than 20.00 front STB.
It's a 46" square 1" by 1" aluminum tubing.
Drill two small holes to the top of the front shock towers and two larger holes for the socket and nut access.
You can look at my gallery for more pix.
It's a 46" square 1" by 1" aluminum tubing.
Drill two small holes to the top of the front shock towers and two larger holes for the socket and nut access.

You can look at my gallery for more pix.
Joined: May 2007
Posts: 3,123
From: Hela Fass Dooo P.N. Dubya
Originally Posted by mdtjr
Looks, I don 't care. It does not flex. Jacked the car up on one side. It's pretty stiff.
Senior Member



Music City Scions
SL Member
Joined: May 2004
Posts: 11,808
From: West TN - Land of twisty roads
Originally Posted by bbszero69
yeah, i noticed a little bit with mine, seemed to tighten up the ride a bit.
The only thing they do is limit strut tower flex on very hard cornering while auto crossing.
I just removed mine while I was repainting it and during normal driving I've noticed zero difference.
Senior Member



Music City Scions
SL Member
Joined: May 2004
Posts: 11,808
From: West TN - Land of twisty roads
Originally Posted by mdtjr
I'll let ya know when and if one of the two bolts snap off.
On looks, I don't run around with the hood off.
On looks, I don't run around with the hood off.
You oviously don't do car shows with it. Actually this picture is most likely being added to the "Spot the Rice" websites. Right up there with the 2ft high plywood wings.
Mine was $30 shipped from ebay. It had proper mounting points and a nice carbon fiber look. I'm sorry, as for functionality and looks I cant get behind it.
But it's not like I havent done goofy things to my box and then improved on them. keep up updated if you come up with any other ideas.
But it's not like I havent done goofy things to my box and then improved on them. keep up updated if you come up with any other ideas.
Thread
Thread Starter
Forum
Replies
Last Post
kb1sxv
Scion xA/xB 1st-Gen Suspension & Handling
2
Oct 21, 2015 05:00 PM





