17x9 Wheel/Tire Combo Fitment Question,,,,Please help
Thread Starter
Senior Member


SL Member
Scion Evolution
Joined: Jun 2006
Posts: 358
From: San Diego, CA
This question is for those running staggered setups or over-wide wheels/tires...
Can I run 245/35/17 on a 17x9 +35offset , on the front and the back of my xb w/ some spacers?
wheels: http://cgi.ebay.com/ebaymotors/17x9-...QQcmdZViewItem
I want to run them wide to sit flush with my Sniper Widebody kit
Does anyone think I would rub?
23.48" - would be wheel/tire hieght w/ new wheels
24.86" - stock steelies / stock tires
25.32" - current setup w/ 225/30/20 & 20x7.5 wheels *these are +45 offset and do not come out to the fender like i hoped, and are also heavy and oversized)
Can I run 245/35/17 on a 17x9 +35offset , on the front and the back of my xb w/ some spacers?
wheels: http://cgi.ebay.com/ebaymotors/17x9-...QQcmdZViewItem
I want to run them wide to sit flush with my Sniper Widebody kit
Does anyone think I would rub?
23.48" - would be wheel/tire hieght w/ new wheels
24.86" - stock steelies / stock tires
25.32" - current setup w/ 225/30/20 & 20x7.5 wheels *these are +45 offset and do not come out to the fender like i hoped, and are also heavy and oversized)
If the tire diameter is smaller, it should work out fine. But if you are going to run a wide body, I would get better offsets before going with spacers. A 9" wide wheel with a +10 offset sits flush with the stock fenders. With the widebody, assuming you are adding 2", I would suggest a -20 offset minimum. To do that with spacers on your +35, you would need 55mm spacers. Not safe and wouldn't look good. JMHO>
Thread
Thread Starter
Forum
Replies
Last Post
bootlgr
Scion xA/xB 1st-Gen ICE & Interior
1
Jan 26, 2016 01:22 AM




