i know very little about tire size an wheel offset and i was in the market looking for work equip 03's and i wanted to get 15X8 for the lip. my question is that I'm on tein basics that are lowered all the way in the back and i can still go about an inch lower in the front, i wanted to know if their was a way i could fit 15x8 without rolling my fenders. i tried searching but couldn't find anything thanks.

 

What's the offset on the 03s? 12?

 

i don't know but i heard that you can order them custom to whatever you wanted

 

Depends on the offset.

I'd call or e-mail Adam at Weksos: http://weaksauce.org

He's got a set of Equip 03's in stock, 15x8, 4x100, and +25 front, +10 rear. Perfect offset for the xB.

 

If you want to keep the ride slammed on coilovers you really need to roll the fenders.

 

so if i do 15x8 with offsets of +25 front and +10 rear and stretch 195 tires then will i be ok

 

Not sure but a better spot for this thread would be the wheel and tire forum.

 

Alot will depend on how low you want your ride.

 

Yes, the +25 and +10 would work good. You could even go to +15 and +0 and be OK. People run +0 offset Sportmax's all the time. Remember, the lower the offset, the more lip you will have. And more with the Works than the Sportmax's because the Works are 2 piece. +0 is about the limit if you don't want camber or rubbing issues.

Negative offsets will give you more lip, but you will need to roll the fender, and/or run camber, depending on how far you go. I will be running 15x9 -5 F and 15x10 -20 R hopefully by the end of the week. The rears will have a 7" lip. So anything is possible, depends on how far you want to go.

 

x2

Front +25 Rear +10

 

thanks i know what to get now all i need is the money

 

i dont want to threadjack, but what wheels go into the negative offsets? im also looking into some work equips but i was unsure.


sorry if i threadjacked

 

Work, SSR, Axis, Fabulous, SPirits, and many more all go into reverse offsets. Check you memoryfab or rbwheels, they usually have choices in negative offset wheels.

 

does anyone have work equip 03s 15x8 +25f +10r with a stretch of 185/55 on coils because im close to getting them and the shop that i talked to said i would rub. thanks