I'm hoping to get 15x8's but at what offsets? Hopefully with no rubbing issues. I've seen xA's with 15X8 Sportmax 002 with no rubbing.
I will opt for 15X7.5's and I'm dropped on Tein S-Techs.

 

on a 15X7.5 i think you can run any positive offset thats in reason down to 0 with almost no problem. 0, 10, 15, 20, 25 i am dropped on Tein ssp coilovers on my xB with a 15X8 and +15 offset and have no rubbing issues, i am not sure how much wider (if any) the xB is than your xA but i think you wouldnt have any problem running the equip 03's on your xA

 

thanks a lot daneisthegreatest. I read in another forum and i quote Zillon "I'd love a set of +20 15x8 Work Equip 03's in the rear, with a set of +30 03's in the front." Would these offsets make them flush with the front and back fenders.

 

That's not really gonna be flush, close, but not dead flush. It would, however, not rub.

 

for a set of 15X8 rims to be flush with the fenders and not running any type of spacers you will probably need to run about a +10 in the rear and probably about a +20 in the front...now these measurements are taken from my xB and they are just me walking out to my box and eyeballing it so i could be off a few mm's lol

 

i would definitely check with the specs on the xB and xA width because i could definitely be off on xA dimensions

 

Yea, the xA has more flare on the rear fender, so you need more than if it was an xB.

 

Thanks for all the feedbacks daneisthegreatest and burstaneurysm you guys were very helpful. I'm definitely going to get these wheels. What tire size though 195/50/15 or 205/50/15. other suggestions?

 

The work equip 03 were going to take 3 months to come in and i did not want to wait that long. So i went with the Axis OG Oldskool 15x8 25mm offset in gold. Got them yesterday and mounted them on today with 205/50/15 falken tires. Will post pics

 

eh I would have waited for the Works they are authentic

 

Dropped on Tein S Techs. Planning on going lower. Maybe Tein Basic Coilovers

 

nice!