****ELEVATIONTC Turbo SETUP! 12.4 14psi 362 whp***********
Well Im selling my Turbo setup as im going a different route currently!
But there Are some things im not selling with the kit!
Also check these videos for the kit
www.youtube.com/elevationtc
Here is what you get:
Custom Scheduel 10 SS Top Mount Manifold T3 Flanged Tial MVS flanged
__________________________________
Mvs flanged Wastegate dump tube
__________________________________
Custom IC PIPEs Wrinkle Black finish Blow through setup Allows for Foglights to be used Flanged to tial BOV
__________________________________
3" Down Pipe 4 bolt mount SS
__________________________________
3" S-Pipe With flex joint
_______________________
Oil Feed Line, t adapter
_______________________
Oil return line
_______________________
Tapped Oil Pan
_______________________
All couplers a tbolt clamps
_______________________
3" Turbo back till axel back.. Use w.e axle back you have or want!
-------------------------------------------
Things you will need
Intercooler (i can give u demensions)
Tial mvs 38mm Wastegate
Tial BOV
Turbo I used both a garret 60-1 and presicion 6265 With no modd to the setup!
will need trade for oil pan.
With 60-1 I made 362 WHP 345 WTQ
Ran 12.4 STOCK MOTOR at 14 PSI!







Im working on price right now..
I have 2750.00 in to what im selling
Make offers!
But there Are some things im not selling with the kit!
Also check these videos for the kit
www.youtube.com/elevationtc
Here is what you get:
Custom Scheduel 10 SS Top Mount Manifold T3 Flanged Tial MVS flanged
__________________________________
Mvs flanged Wastegate dump tube
__________________________________
Custom IC PIPEs Wrinkle Black finish Blow through setup Allows for Foglights to be used Flanged to tial BOV
__________________________________
3" Down Pipe 4 bolt mount SS
__________________________________
3" S-Pipe With flex joint
_______________________
Oil Feed Line, t adapter
_______________________
Oil return line
_______________________
Tapped Oil Pan
_______________________
All couplers a tbolt clamps
_______________________
3" Turbo back till axel back.. Use w.e axle back you have or want!
-------------------------------------------
Things you will need
Intercooler (i can give u demensions)
Tial mvs 38mm Wastegate
Tial BOV
Turbo I used both a garret 60-1 and presicion 6265 With no modd to the setup!
will need trade for oil pan.
With 60-1 I made 362 WHP 345 WTQ
Ran 12.4 STOCK MOTOR at 14 PSI!

Im working on price right now..
I have 2750.00 in to what im selling
Make offers!
Last edited by ElevationTC; Oct 11, 2009 at 03:16 PM.






