SOLD
Thread Starter
Joined: May 2007
Posts: 951
From: Pittsburgh, PA
**SOLD**
Turbo Toyotas Simple Kit for sale. I'm selling because I've got a new job lined up and have decided to get a new car instead of modding the Scion. Everything works great. The turbo has about 1,000 miles on it, brand new from Precision before that.
This is a complete kit. Please do not ask for part outs. I WILL ignore you and if I decide to part-out, will do so when I feel like it. Thank you.
1. Turbo Toyotas Simple Manifold
2. Turbo Toyotas Simple 2.5" 4-Bolt Downpipe
- I added a stainless 38mm wastegate recirc'd dump tube
3. Precision T3/T04E 50-Trim Turbocharger
4. Braided Stainless Oil Feed & Drain Lines w/ All Hardware
5. 2.5" S-Pipe
6. 38mm Tial Wastegate, Black w/ 8.7psi spring
7. FMIC
8. Intercooler piping, all but one piece that was I had made for better fitment is PC'd wrinkle black
9. HKS SSQ Blow-Off Valve, Black
10. Black couplers and clamps
11. 550cc Injectors (less than 1k miles)
12. AEM FIC w/ tune for 10psi from PTuning (NO HARNESS INCL.)
13. Vacuum Block and lines
14. AutoMeter ES Boost Gauge w/ CF Cubby Panel
Asking $2100 shipped or $2000 picked-up
**SOLD**
Turbo Toyotas Simple Kit for sale. I'm selling because I've got a new job lined up and have decided to get a new car instead of modding the Scion. Everything works great. The turbo has about 1,000 miles on it, brand new from Precision before that.
This is a complete kit. Please do not ask for part outs. I WILL ignore you and if I decide to part-out, will do so when I feel like it. Thank you.
1. Turbo Toyotas Simple Manifold
2. Turbo Toyotas Simple 2.5" 4-Bolt Downpipe
- I added a stainless 38mm wastegate recirc'd dump tube
3. Precision T3/T04E 50-Trim Turbocharger
4. Braided Stainless Oil Feed & Drain Lines w/ All Hardware
5. 2.5" S-Pipe
6. 38mm Tial Wastegate, Black w/ 8.7psi spring
7. FMIC
8. Intercooler piping, all but one piece that was I had made for better fitment is PC'd wrinkle black
9. HKS SSQ Blow-Off Valve, Black
10. Black couplers and clamps
11. 550cc Injectors (less than 1k miles)
12. AEM FIC w/ tune for 10psi from PTuning (NO HARNESS INCL.)
13. Vacuum Block and lines
14. AutoMeter ES Boost Gauge w/ CF Cubby Panel
Asking $2100 shipped or $2000 picked-up
**SOLD**
Last edited by Twilight2ner; Apr 8, 2010 at 02:41 AM.
Thread Starter
Joined: May 2007
Posts: 951
From: Pittsburgh, PA
Yeah, I have an 07, so a MAF adapter would be needed for an 05-06, but other than that it'll bolt on any year.
Right around 250whp with 8.7psi (looks like 7.5 or so reaching the motor), 2.5" exhaust and catted.
Right around 250whp with 8.7psi (looks like 7.5 or so reaching the motor), 2.5" exhaust and catted.
Thread Starter
Joined: May 2007
Posts: 951
From: Pittsburgh, PA
I'm pretty sure it will. You'd just need to get a lower PSI wastegate spring.
Yes, but I have a pending offer. If that falls through I will update the first post.
Thread
Thread Starter
Forum
Replies
Last Post
rain7905643
PPC: Engine / Drivetrain
3
Jun 13, 2018 05:29 AM






