Deatchwerks 1300cc Injectors - these have been used in my car on E85 for the last year or so. They are not listed on DW's website, as they were provided to me as a custom solution for the fuel needs on my car. DW now has EV11 bodies and I will be using a 2200cc injector in the future to provide a nearly limitless fuel system. I made 656whp on these on E85, however I would not recommend this - I was at 96-98%idc - I would safely say they would make around 600whp on E85. They ARE NOT plug and play and will require you to solder in new clips, I will include brand new clips with 6" lead wire with purchase. I also still have the spec sheet with flow and latency values which I will include. Feel free to make an offer - price is $350 shipped OBO.

 

what fuel pressure were you running?

 

65psi base + 1:1 lol - so umm total around 96psi I have 2 DW301's in the tank and 1/2" feed line so they sustained it quite well, in the end I still ran out of injector, made a dumb move to try to make a few highway pulls and a small boost spike ended up destroying the piston in cylinder 3.

Probably a good idea that I make an ammendment to this -

600whp on E85 would be obtainable on these with 65psi base pressure (my car dyno'd like 603whp at 28psi and I was right around 82-85%idc)

On 43.5psi base pressure they would probably be good to around 550whp on E85. For pump/race gas, you can add close to 100-150whp.

 

Oh and I was just told I can get you plug and play adapters, if whoever wants these injectors desires them to be plug and play, I can get adapter harnesses for an extra $20.

 

Bummmmppp Make an offer

 

Bump - feel free to make an offer folks