HP racing evo
Hey i was wondering if these would rub. http://www.wheelsnext.com/product.phtml?p=1583
i have tein s techs
thanks
i have tein s techs
thanks
Not as much...I have the stock 17 size aftermarket rims with the s.techs and the only time i rub is if i have two or more passengers with me and going through some ruff terrain. Without passengers i can handle a lot more buts its close, so with 18's just make sure and take everything slow till you figure out what it can do. Id also recommend get some real low profile tires.
https://www.scionlife.com/forums/vie...=asc&start=125
Im at work and thats the only one i have up here. In that pic the front wheel is cocked sideways a little making it look like theres a bigger wheel well gap then there is. Ill have to post some more in a couple of days if you want different angles...just moved and the internet isnt up yet.
Im at work and thats the only one i have up here. In that pic the front wheel is cocked sideways a little making it look like theres a bigger wheel well gap then there is. Ill have to post some more in a couple of days if you want different angles...just moved and the internet isnt up yet.
Originally Posted by danman04x
Hey i was wondering if these would rub. http://www.wheelsnext.com/product.phtml?p=1583
i have tein s techs
thanks
i have tein s techs
thanks
Ok... Being a vendor for parts and an owner of the HP wheels I'll give you some info on this.
With a 1.4" drop with 18x8s front and rear you will rub. This is mostly due to the large offset. I'm running this combination and it rubs under very aggressive driving or a decent dip.
19" HP wheels... You may find the standard 19x8 for your car but... You can not use staggered wheels from HP. They do not manufacture a 5x100 bolt pattern with a staggered wheel size because no car with our bolt pattern actually needs it. Axxis is one of the few to do it.
The picture you see advertising staggered fitment with a 5 lug pattern is for a 5x114.5, which is usually found on larger, AWD or RWD cars.
Hopefully that helps so you don't drop $2k to find out you can't drive on them. Good luck with your decision.
With a 1.4" drop with 18x8s front and rear you will rub. This is mostly due to the large offset. I'm running this combination and it rubs under very aggressive driving or a decent dip.
19" HP wheels... You may find the standard 19x8 for your car but... You can not use staggered wheels from HP. They do not manufacture a 5x100 bolt pattern with a staggered wheel size because no car with our bolt pattern actually needs it. Axxis is one of the few to do it.
The picture you see advertising staggered fitment with a 5 lug pattern is for a 5x114.5, which is usually found on larger, AWD or RWD cars.
Hopefully that helps so you don't drop $2k to find out you can't drive on them. Good luck with your decision.
Thread
Thread Starter
Forum
Replies
Last Post
rain7905643
PPC: Engine / Drivetrain
3
Jun 13, 2018 05:29 AM
kslim619
Scion tC 2G Suspension & Handling
0
Sep 18, 2015 06:54 PM
Subaru86
Scion FR-S ICE & Interior
0
Sep 10, 2015 08:11 AM









