Im just curious if anyone here is running camber bolts up front in the xB. They can be Progress or whatever brand, but Im looking for someone with bolts to acheieve camber. I know I can get Cusco plates from Sean, but how it stands, is that Im a poor college kid and the next set of wheels Im getting are probably going to require me to run camber in front (and roll fender) so theres no rub. If no one here has them on their xB, have any of you dealt with camber bolts before? How did you like them? Any advice or words of wisdom would be awesome on this.

Thanks
Scott

(and yes I searched, but Im not looking for people with plates, and Im not wondering where I can get these. I need to see WHO has them on)

 

i'm running camber bolts. i'm using Ingalls bolts, got em from summit racing. cheapest on the net.

they're fine. run 2 on each strut and you can achieve 3 degrees of negative camber.

i'm currently running 1.7 degrees negative, and have been ok . make sure you lubricate the bolts as they will rust if you do not. i would recommend the ingalls as they're cheaper, and all the same crap..

 

I've got them on mine with airlift sturts, to help correct the postive camber thing. I run them at 1.75/ the max negative they will go. They helped a little with fender to wheel clearence, but I can't really see the change on the wheel. I wasn't real impressed but for what they cost, what the hell.

 

I was running some for a while and they seemed to eat tires really fast. HAHAHAHA! Sucks! For a little while i was running 4 camber bolts and cusco plates in front. Not good for the tires. But most of that wear could have been from bad toe.