Installing RS2 mirror covers?
I'm wondering if anyone of you know how to install the mirror covers that scionsport were selling? These are the one's that look like the RS2 style with the signal lights. I live in the Nor Cal area and if any shops would paint and install them for a reasonable price?[/url]http://scionsport.com/store/product_info.php/cPath/41/products_id/296?osCsid=2f942edd97f464c13a6f2dfe12156cc8
I installed mine in about 3 hours total. didn't know what I was doing but I tried and suceed 
had to take off the mirror completely so I can run the wires through the hole where the power mirro wires ran. took off my door panel so I can run the wires through the doors and into the fender. pulled off the side markers and tap the wires into it.
looks great! the mirror covers did leave a gap between the cover and the nirror so I went to pep boys and purchased some truck door edge guards and wrapped it around the covers and it covered the gap up.
Looks awesome






had to take off the mirror completely so I can run the wires through the hole where the power mirro wires ran. took off my door panel so I can run the wires through the doors and into the fender. pulled off the side markers and tap the wires into it.
looks great! the mirror covers did leave a gap between the cover and the nirror so I went to pep boys and purchased some truck door edge guards and wrapped it around the covers and it covered the gap up.
Looks awesome






here is a step by step install notes I wrote up.
https://www.scionlife.com/forums/vie...016&highlight=
hope this helps.
https://www.scionlife.com/forums/vie...016&highlight=
hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
TheRedBox
Scion xA/xB 1st-Gen Drivetrain & Power
31
Dec 2, 2003 04:53 PM









