well i got some 1 1/4" spacer/adapters on the rear rims.... they look freggin awsome!! .... but.... when the car has more than 2 people in it it scrubs.. and its rippin my pirelli tires apart.... any solitions... i took them off for now but would love 2 find a way to keep them on..

 

The proper turn is refered to as rubbing. But whats you wheel/tire set up? I think you might be to spaced out. He the car being lower with 2 people in the back, its closer to the fender cause of the 1 1/4 spacing. YOur solution is either to not have as much spacing or roll your fenders so that you dont rub.

 

agreed. adding an inch and quarter would be quite alot of spacing. 1.25 inches converts to 31.75 millimeters. So if you were running a 45 offset to begin with then added spacers you would be sitting at a +14 offset which depending on the wheel and tire combo is definetly enough to rub and thats assuming you were using a high offset to begin with. If you had a 35 offset adding those spacers puts you close to a 0 offset which will always rub, no matter what.

 

maby i"ll just sell them..... anyone interested?

 

just roll your fenders.....

 

what he said!!!

 

ezer said then done...

 

I agree. I tried to get that done, and my fenders became mis-shapen. I had the exact same problem, except with a 1-inch spacer. I havent re-test-fitted the spacers yet (with my badly rolled fenders) but I will soon.

 

Is the driving age less thatn 16 y/o in az? I see that you're 15....

just asking is all.

 

No its 16. I only have a drivers permit. I also do alot of illicitly skilled driving lol. But i turn 16 in like 3 weeks.