HEY ANY ONE RUNNING SPORT MAX 002'S WITH 195/50/15 ON TANABE DF210'S. IF YOU HAVE 4 ADULKTS IN THE CAR DO YOU RUB IN THE REAR

 

i hope not...because in the spring ill be lookin for a set in red on 194/45 tires

 

thats what im running. get your rear fenders rolled and you will be fine.

 

rub rub rubrubrub.... thats what i get with 4 cheerleaders in the back for last weekend. (all weigh from 95-110lbs)

 

run a search and your caps locks is on

 

If you rollin' on 15 x 8 0 offset then you'll def. rub. I'm rollin' on the 002's 15 x 8 0 offset on a 2" drop and I rub with a 25lbs toddler in the back. I've already rolled my fenders and i'm working on getting the OTG camber shims to help out. BTW, I have the 15 x 7 +38 et on the fronts with no rubbing at all.

 

ruba dub dub,,,,,these wheels aren't for ours...I finally sold mine to a 240z drifter,,,,,thank God.....

 

i made mine work. no rubbing at all. teehee. im happy.

 

how? how dropped were you? rolled fenders? pics?

 

teah ...how you do it?

 

i rolled and pulled the fenders. no rubbing.

 

2tone.... come to new orleans and fix mine... ill bring you out to bourbon and all... just fix MY BOX!

 

sounds liek a deal zach, make him pay gas too!

 

anything 15x8 will rub.

 

^^^That is not true at all, offset means everything. I have 8.5 inch wheels all the way around, but they have a higher offset (+25) so they dont stick out as far. No rubbing at all and no need to roll fenders.

 

i have 185-60 tires on my sportmax wheels...had very little rubbing in the front only rears were fine....i actually added 13mm of spacers for the rears to get it fluch to the lover soul flares

 

without serious and I mean SERIOUS fender mods those rims look dumb.

if your wheels literally stick out way past the fenders so much so as you cannot tuck tire or roll with a 3 inch drop without rubbing liek all hell you shouldn't run them.


oh and the 15x8 0 offset sportmax's do that......

wheels look good , they look great with super hipari and a mean drop but that offset is too extreme for stock fenders. and the result is not very good imo.

don't take this as me hating. take it as very constructive criticism. just my opinions

 

oops, yes, that is correct. what i meant was the offset has to be right hehe...