Door Handle Accent Lights Install
Senior Member
Scikotics
SL Member
Joined: Feb 2005
Posts: 1,396
Originally Posted by xIxAMxHOLLYWOODx
just make sure its clear of all the moving parts of the door handle, you dont want wires getting pinched. also run enough excess so that it wont interfere with the window moving up and down. the last thing you want is to roll down your window and have it yank the light out or tear the wires...
Thread Starter
Senior Member
SL Member
Joined: Oct 2006
Posts: 1,666
From: Lake Elsinore, CA
these are pretty bright, but go as bright as youd like. you also have to make sure that it will fit. these superflux's were a perfect fit. not sure how big 1 watt's are...
Thread Starter
Senior Member
SL Member
Joined: Oct 2006
Posts: 1,666
From: Lake Elsinore, CA
Look at the DIY, it walks you through removing the lock mechanism. Once you get that out you slide the handle towards the rear of the car then pull out on it like you're trying to open the door.
Thread Starter
Senior Member
SL Member
Joined: Oct 2006
Posts: 1,666
From: Lake Elsinore, CA
Look at the DIY, it walks you through removing the lock mechanism. Once you get that out you slide the handle towards the rear of the car then pull out on it like you're trying to open the door.
Junior Member
Joined: Jan 2007
Posts: 10
From: PA
Originally Posted by xIxAMxHOLLYWOODx
Look at the DIY, it walks you through removing the lock mechanism. Once you get that out you slide the handle towards the rear of the car then pull out on it like you're trying to open the door.
Senior Member
The Family
SL Member
Joined: Feb 2006
Posts: 1,551
Originally Posted by satoman44
Originally Posted by LiquidFX
i have done something similar to this. i put 4 super white LED's in my mirror turn signals, they project form just under the mirror and out about 10 ft
http://scionsmoke.com/viewtopic.php?t=483
Member
SL Member
Joined: Dec 2006
Posts: 51
i wonder if everythigns still working fine. the black casing that covered it from oznium makes it waterproof, so taking that off makes is non-waterproof, and seeing how its on the handle, some water might be able to get up in there maybe?
